Page 126 / 171
Scroll up to view Page 121 - 125
121
D-Link DHP-1565 User Manual
Section 3 - Configuration
Add Wireless Device with WPS
Adding a Wireless Device Using the PIN Method
Please select one of the following configuration methods and click
Next
to continue.
Click
Add Wireless Device with WPS
.
If your wireless device supports WPS, select
Auto
and click
Next
to
continue.
Page 127 / 171
122
D-Link DHP-1565 User Manual
Section 3 - Configuration
Adding a Wireless Device Using the PBC Method
Select PBC to use Push Button Configuration in order to connect to
your network.
Click
Connect
to continue.
Press the Common Connect
Button on the wireless device that you
are adding to your network to complete the setup.
Page 128 / 171
123
D-Link DHP-1565 User Manual
Section 3 - Configuration
Manually Add Wireless Device with WPS
If you would like to add a wireless device with WPS manually, select
Manual
and click
Next
to continue.
Enter the following settings in the wireless device you are adding to
your wireless network. Click
Ok
to continue.
Page 129 / 171
124
D-Link DHP-1565 User Manual
Section 3 - Configuration
User Limit Settings
In this section, you may set a limit to the number of wireless clients to prevent heavy wireless traffic.
Page 130 / 171
125
D-Link DHP-1565 User Manual
Section 3 - Configuration
Admin
This page will allow you to change the Administrator password. The administrator password has read/write access.
Enter a new password for the Admin User
Name. The administrator account can change
the configuration of the device.
Enter the same password that you entered in
the previous textbox in order to confirm its
accuracy.
Enter DHP-1565.
Enables a challenge-response test which will
require users to type letters or numbers from
a distorted image displayed on the screen
to prevent online hackers and unauthorized
users from gaining access to your device’s
configuration. This feature is disabled by
default.
Click
Save Settings
to save and activate the
new changes.
Password:
Verify
Password:
System Name:
Enable
Graphical:
Save Settings: