Page 116 / 171
Scroll up to view Page 111 - 115
111
D-Link DHP-1565 User Manual
Section 3 - Configuration
Network Settings - DHCP
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
LAN
Connection
Type:
Device Name:
Save Settings:
Use the drop-down menu to select Dynamic IP (DHCP)
to automatically obtain an IP address on the LAN/private
network.
Enter the Device Name of the AP. Changing the Device
Name is recommended if there is more than one D-Link
device within the subnet.
Click
Save Settings
to save and activate the new changes.
Page 117 / 171
112
D-Link DHP-1565 User Manual
Section 3 - Configuration
Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses.
LAN Connection
Type:
IP Address:
Subnet Mask:
Default
Gateway:
Device Name:
Save Settings:
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The default IP
address is
192.168.0.1. If you change the IP address, once
you click Apply, you will need to enter the new IP address
in your browser to return to the configuration utility.
Enter the Subnet Mask.
Enter the Gateway. This is usually the LAN or internal IP
address of your router.
Enter the Device Name of the AP. It is recommended that you
change the Device Name if there is more than one D-Link
device within the subnet. You can enter the device name
of the AP into your web browser to access it instead of IP
address for configuration. If you are using the device name
to connect, make sure that your PC and your DHP-1565 are
on the same network.
Click
Save Settings
to save and activate the new changes.
Network Setup - Static IP
Page 118 / 171
113
D-Link DHP-1565 User Manual
Section 3 - Configuration
My IPv6
Connection is:
LAN IPv6 Address
settings:
Select Link-local only from the drop-down menu.
This section displays the IPv6 address of the router.
My IPv6
Connection is:
LAN IPv6
Address:
Select static IPv6 from the drop-down menu.
Enter the LAN (local) IPv6 address for the router.
Page 119 / 171
114
D-Link DHP-1565 User Manual
Section 3 - Configuration
My IPv6
Connection:
IPv6 DNS
Settings:
Select
Autoconfiguration (Stateless/DHCPv6)
from
the drop down menu.
Select
Obtain IPv6 DNS Server automatically
or enter
a specific DNS Server address.
Page 120 / 171
115
D-Link DHP-1565 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link PowerLine AV using the web-based configuration utility.
PLC Settings - AP Mode
19216811.live