D-Link DHP-1565 Router Manual PDF (Setup & Configuration Guide)

Page 111 / 171 Scroll up to view Page 106 - 110

106

D-Link DHP-1565 User Manual

Section 3 - Conﬁguration

Conﬁguration (AP Mode)

This section will show you how to conﬁgure your new D-Link wireless router using the web-based conﬁguration utility.

Web-based Conﬁguration Utility

To access the conﬁguration utility, open a web-browser such as Internet

Explorer and enter http://dlinkrouter WXYZ (WXYZ: four-digit suﬃx of the

PLC MAC address located on the botton of device) or the IP address of the

router (192.168.0.50).

Select

Admin

in the User Name ﬁeld. Leave the password blank by default.

If you get a

Page Cannot be Displayed

error, please refer to the

Troubleshooting

section for assistance.

http://dlinkrouter WXYZ

Page 112 / 171

107

D-Link DHP-1565 User Manual

Section 3 - Conﬁguration

Wireless Setup Wizard

To use our web-based wizard to assist you in connecting your DHP-1565,

click

Launch Wireless Setup Wizard

to begin.

Click

Select one of the two conﬁguration methods. Select

WPS

if your wireless

device support WPS and click

Press down the Push Button on the wireless device within 116 seconds.

Page 113 / 171

108

D-Link DHP-1565 User Manual

Section 3 - Conﬁguration

If you would like to setup your network manually, select

Manual

and click

Enter the SSID (Service Set Identifier). The SSID is the name of your

wireless network. Create a name using up to 32 characters. The SSID is

case-sensitive. Select

Assign a network key and click

Once this screen appears, the setup is complete. You will be given a detailed

summary of your wireless security settings.

Click

Save

to continue.

Page 114 / 171

109

D-Link DHP-1565 User Manual

Section 3 - Conﬁguration

Wireless Setup

Check this box to enable the wireless function. If you

would prefer not to use wireless, uncheck the box to

disable all the wireless functions. You may also set up a

speciﬁc time range (schedule). Select a schedule from

the drop-down menu or click Add New Schedule to

create a new schedule.

When you are browsing for available wireless

networks, this is the name that will appear in the list

(unless Visibility Status is set to Invisible, see below).

This name is also referred to as the SSID. For security

purposes, changing the default network name is

highly recommended.

Select one of the following:

802.11n Only - Select if you are only using 802.11n

wireless clients.

Mixed 802.11n, 802.11g and 802.11b - Select if you are

using a mix of 802.11n, 11g, and 11b wireless clients.

Mixed 802.11n, 802.11g - Select if you are only using

802.11n, 11g wireless clients.

The Auto Channel Scan setting can be selected to

allow the DHP-1565 to select the channel with the least

amount of interference (during boot-up). Indicates the

channel setting for the DHP-1565.

The channel can be changed to ﬁt the channel setting

for an existing wireless network or to customize the

wireless network. If you enable Auto Channel Scan,

this option will be grayed out.

Enable

Wireless:

Wireless

Network

Name:

802.11

Mode:

Enable Auto

Channel

Scan :

Wireless

Channel

Page 115 / 171

110

D-Link DHP-1565 User Manual

Section 3 - Conﬁguration

Channel

Width:

Wireless

Security

Settings:

Save Settings:

Select the Channel Width:

Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients.

Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices

can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings

with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user. Please refer

to page

121

.

Click

Save Settings

to save and activate the new changes.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share