Page 146 / 171
Scroll up to view Page 141 - 145
141
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you
are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Connect to a Wireless Network
Wireless Icon
Page 147 / 171
142
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to connect to and click
the
Connect
button.
If you get a good signal but cannot access the Internet, check your TCP/IP
settings for your wireless adapter. Refer to the Networking Basics section in
this manual for more information.
4. The following window appears while your computer tries to connect to the
router.
Page 148 / 171
143
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your router and click
Connect
. You can also connect by pushing the Common Connect
Button
on the router.
It may take 20-30 seconds to connect to the wireless network. If the connection
fails, please verify that the security settings are correct. The key or passphrase
must be exactly the same as on the wireless router.
Page 149 / 171
144
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Configure WPS
The WPS feature of the router can be configured using Windows
®
7. Carry out the following steps to use Windows
®
7 to configure the WPS feature
of the router:
1. Click the
Start
button and select
Computer
from the Start menu.
2. Click the
Network
option.
Page 150 / 171
145
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3. Double-click the DHP-1565.
4. Input the WPS PIN number (displayed in the WPS window on the Router’s
LCD screen or in the
Setup
>
Wireless Setup
menu in the Router’s Web UI)
and click
Next
.
19216811.live