Page 151 / 171
Scroll up to view Page 146 - 150
146
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click
Next
to continue.
Page 152 / 171
147
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
7. The following window appears while the Router is being configured.
Wait for the configuration to complete.
8.
The following window informs you that WPS on the DHP-1565 has been setup
successfully.
Make a note of the security key as you may need to provide this security key
if adding an older wireless device to the network in the future.
9. Click
Close
to complete WPS setup.
Page 153 / 171
148
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
Vista®
utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select
Connect to a network
.
If you receive the
Wireless Networks Detected
bubble, click on the center of
the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the
Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/IP settings
for your wireless adapter. Refer to the
Networking Basics
section in this manual
for more information.
Page 154 / 171
149
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Configure Wireless Security
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you
are joining an existing network, you will need to know the security key or passphrase being used.
2.
Highlight the wireless network (SSID) you would like to connect to and click
Connect
.
1.
Open the Windows Vista® Wireless Utility by right-clicking on the wireless
computer icon in your system tray (lower right corner of screen). Select
Connect to a network
.
Page 155 / 171
150
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3.
Enter the same security key or passphrase that is on your router and click
Connect
.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the security settings are correct. The key or passphrase must be
exactly the same as on the wireless router.
19216811.live