1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DGS-3224TGR
    5. /
  5. 25
Page 121 / 160 Scroll up to view Page 116 - 120
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
109
TACACS Group
Figure 6- 108.
TACACS Group window
To add an entry to this table, click
New
. To remove an entry, select it and then click
Delete
.
Figure 6- 109.
TACACS Group – Add window
TACACS Group Settings
Figure 6- 110.
TACACS Group Settings window
Page 122 / 160
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
110
To add an entry to this table, click
New
. To remove an entry, select it and then click
Delete
.
Figure 6- 111.
TACACS Group Settings – Add window
TACACS Method List
Figure 6- 112.
TACACS Method List window
To add an entry to this table, click
New
. To modify an entry on this table, select it and then click
Edit
. To remove an entry,
select it and then click
Delete
.
Figure 6- 113.
TACACS Method List – Add window
Enter a TACACS/TACACS+/XTACACS method list name and then click
Apply
.
Page 123 / 160
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
111
Figure 6- 114.
TACACS Method List – Edit window
Enter a TACACS/TACACS+/XTACACS method list name and then click
Apply
.
Authentication
Figure 6- 115.
Authentication window
Fill in the TACACS/TACACS+/XTACACS Authentication settings and then click
Apply
to let your changes take effect.
Enable Admin
The
Enable Admin
window is for users who have logged on to the Switch on the normal user level, and wish to be
promoted to the administrator level. After logging on to the Switch, users will have only user level privileges. To gain
access to administrator level privileges, the user will open this window and will have to enter an authentication password.
Possible authentication methods for this function include TACACS/XTACACS/TACACS+/RADIUS, user defined server
groups, local enable (local account on the Switch), or no authentication (none). Because XTACACS and TACACS do not
support the enable function, the user must create a special account on the server host, which has the username "enable", and
a password configured by the administrator that will support the "enable" function. This function becomes inoperable when
the authentication policy is disabled.
When the
Enable Admin
window appears, click the
Enable Admin
button revealing a window for the user to enter
authentication (password, username). A successful entry will promote the user to Administrator level privileges on the
Switch and the following window will be displayed.
Page 124 / 160
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
112
Figure 6- 116.
Enable Admin window
System Log
The switch can send Syslog messages to up to four designated servers. Use the System Log Server.
System Log State
Figure 6- 117.
System Log State window
To enable the System Log Server settings you have chosen on the System Log Server windows, select
Enabled
and click
the
Apply
button.
System Log Host
Figure 6- 118.
System Log Host window
Click
New
to add an entry to this table. Configure the System Log Server settings in the
System Log Server - Add
menu.
Page 125 / 160
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
113
Figure 6- 119.
System Log Host – Add window
Figure 6- 120.
System Log Host – Edit window
See the table below for a description of the message types.
Parameter
Description
Index
Syslog server settings index (1-4).
Host IP
Type in the IP address of the Syslog server receiving the message.
Severity
Select the level of message sent, select:
Warning
,
Informational
or
All
.
Facility
Some of the operating system daemons and processes have been assigned Facility
values. Processes and daemons that have not been explicitly assigned a Facility may
use any of the "local use" facilities or they may use the "user-level" Facility. Those
Facilities that have been designated are shown in the following: Bold font means the

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top