31

DCS-G900 User’s Manual

D-Link Systems, Inc.

DCS-G900 Configuration

Advanced > E-mail

(continued)

Time Schedule

Enable e-mail

image to e-mail

account:

Interval:

Choosing always will start sending snapshots to the recipient’s e-mail

account right away. Choosing schedule will give you a choice as to when

to start sending snapshots to the recipient’s e-mail account by the day,

as well as what time this should start and when to stop.

The frequency of the snapshot interval can also be configured from 1

to 65535 seconds.

32

DCS-G900 User’s Manual

D-Link Systems, Inc.

DCS-G900 Configuration

Tools > Test

Test FTP Server:

Test E-mail

Account:

This will send a snapshot to the FTP server that you have configured in

the

Upload

section. If you have configured the FTP correctly you will be

able to see a test file in your FTP server.

This will send a snapshot to the e-mail account that you have configured in

the

E-mail

section. If you have configured the SMTP account correctly you

will be able to send a test file to the e-mail account of the recipient.

33

DCS-G900 User’s Manual

D-Link Systems, Inc.

DCS-G900 Configuration

Tools > Reset

Tools > Firmware

Restart:

Factory Reset:

This will reboot the camera once you select

Apply

.

Select

Apply

will reset the camera to all its default settings. The Installation

Wizard may need to be used in order to find the camera again.

Firmware Update:

This will allow you to upgrade the firmware for the camera. Click

Browse

to find the path to the file of the firmware that you have previously saved

by visiting http://support.dlink.com/.

34

DCS-G900 User’s Manual

D-Link Systems, Inc.

DCS-G900 Configuration

Tools > Backup

Backup Device

Configuration to

File:

Restore Device

Configuration

from File:

This will allow you to save the camera’s configurations to your hard

drive.

This is particularly useful if you will be installing more than one camera;

remember to make the IP Address unique to each camera, so there will

not be two cameras with the same IP Address on the same network.

35

DCS-G900 User’s Manual

D-Link Systems, Inc.

DCS-G900 Configuration

Status > System

Displays information about the Device Status, such as Camera Name, Location, Model,

Firmware Version, MAC Address, and IP Address.

Also displays information about the Ethernet Status, such as Link, Speed, and Duplex.

Status > Video

Displays information about the Video Status, such as Video Resolution, Compression Rate,

Frame Rate, Frame Size, and Light Frequency.