Page 51 / 78
Scroll up to view Page 46 - 50
51
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
How to Format the Camera View
Select the
Combine
button
on the IPView SE and you should see all four
cameras combined (see image below).
A maximum of 4 cameras can be viewed simultaneously with IPView SE.
Select any of the four cameras for the View Mode format. If there is a green light next to
the camera button that means that the IPView SE has a camera connected.
Page 52 / 78
52
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
How to Rotate the Video View
In View Mode format, click on the
Rotate
button
and the image should rotate 90
o
to
the left (see image below).
View/List
Click the
View/List
button
. All the cameras and their properties, such as the camera
name, IP Address, user name, and functional information, will be displayed in the View/List
screen
Page 53 / 78
53
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Zoom
Click the
Zoom
button
to zoom in on the camera image. The options under zoom are
Fit Window x1, x1.5, x2, x2.5, x3, x3.5, and x4.
Color Setting
Click the
Color Setting
button
, to adjust the Brightness, Contrast, and Hue.
Wake Up Control Panel
Click the
Wake Up Control Panel
button
to open the control panel again when it is
closed.
Always on Top
Click the
Always on Top
button
to have the display screen always appear on top.
Close
Click the
Close
button
to close the display screen of the camera.
Page 54 / 78
54
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
How to take a Snap-Shot with the Camera
In View Mode format select the
Snapshot
button
located on the upper left corner of the
screen. A Save Image dialog box will appear for you to save the snap shot picture.
How to Start Recording
To start recording with a camera, click the
Manual Recording
button
. An AVI file will
appear in your IPView SE folder.
Note:
You must stop recording before changing any camera settings.
How to Stop Recording
To stop recording with a camera, click the
Manual Recording
button
again.
Page 55 / 78
55
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Camera Settings
Once you have completed the initial configuration of the DCS-G900 using the Web-based
interface, you can review or change your configuration using either the Web-based configuration
utility or the Settings in the DCS-G900 IPView SE.
Configure Camera from Web
Click the
Configure Camera from Web
button
to start configuring your camera from
the web again (see page 19).
Motion Setting
Click the
Motion Setting
button
to setup the options for motion recording. On this
screen you can select to
Invoke Alarm
and/or
Send E-mail.
Click the
E-mail Setting
button
to configure your E-mail. The
Sensitivity Level
can be adjusted between Low and High for
motion recording.
19216811.live