Page 56 / 78
Scroll up to view Page 51 - 55
56
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Manual Recording
Click the
Manual Recording
button
, to begin recording images from your camera.
Schedule Recording
Click the
Schedule Recording
button
to record based on a specific time and date.
Click
Add
to set the time and date for recording.
Page 57 / 78
57
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Schedule Recording
(continued)
Select
Date Mode
and enter in the
Start
date/time, and
Stop
date/time. The camera will
start to record according to the specified date and time period entered. Select
Week Mode
to specify which date to record during the time period.
Motion Recording
Clicking on the
Motion Recording
button
will record images upon motion detection.
When this option is selected and the camera detects motion within the range of the viewing
window, recording will be triggered. Recording will continue until no motion is detected.
Click on the
Motion Setting
button
to set the sensitivity levels for motion recording
(see page 55).
Scan
Click the
Scan
button
to display each camera one by one. When this option is selected
the camera(s) will briefly display their images in the View Mode format.
Page 58 / 78
58
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
Camera’s Extra Information
Click the
Camera’s Extra Information
button
to view information about your camera.
Play
Click the
Play
button
to playback video recorded from your camera.
Page 59 / 78
59
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
System Configure
Click the
System Configure
button
on the IPView SE.
The DCS-G900 will not have a profile to load initially, you will have to
select all of your cameras and then click the
Save
or
Save As
buttons to
save your profile. Up to four cameras can be saved per configuration, there
are no limits as to how many configurations can be saved. Click the
Load
button to load any of your configurations.
Profile:
Page 60 / 78
60
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
To add another storage, simply click the
Add
button. The following Storage
dialog box will appear, allowing you to select a drive and to
Enable Storage
on that drive.
The
Single HDD Reserved Space
option permits reserved HDD space from
500 MB to 1000 MB.
The
Split Recording File
option is used to adjust the file size for recording the
video images (the default setting is 10MB). If the recorded video files reach
the file size, video images will be recorded into another file automatically.
By File Size - permits recording by file size from 10 MB to 50 MB.
Log Storage:
Storage List:
To modify the storage, click the
Modify
button. You should see the storage
dialog box again.
To delete a storage, select the path and click the
Delete
button. If you try
to delete the very last storage in the list, you will receive a warning message
telling you to keep one storage at least.
19216811.live