11

DCS-G900 User’s Manual

D-Link Systems, Inc.

Security

Security

To ensure the highest security and prevent unauthorized usage of the DCS-G900, the

Administrator has the exclusive privilege to create all users. The DCS-G900 supports

multi-level password protection/access that can be restricted by the Administrator for

defined users who have a

User Name

and

User Password

.

The Administrator can release a public

User Name

and

Password

so that when remote

users access the DCS-G900 they will be allowed to view the images transmitted by the

DCS-G900.

Note:

When the DCS-G900 is used for the first time, it is highly recommended that the

Administrator set the

Admin ID

and

Admin Password

to constrain user access to the

DCS-G900 since the Default settings are Null String (no password). Once the ID and Password

are defined, only the Administrator has access to the management of the

DCS-G900. This

procedure should be done as soon as possible since the security features of the DCS-G900

will not be enabled until the

Admin ID

and

Admin Password

is defined.

12

DCS-G900 User’s Manual

D-Link Systems, Inc.

The DCS-G900 Setup Wizard

The DCS-G900 Setup Wizard

You are now ready to run the Setup Wizard, which will guide you quickly through the installation

process.

Insert the

D-Link DCS-G900

Driver CD into

your CD-ROM drive.

Click

Next

Click

Install Wizard

Click

Install Software

13

DCS-G900 User’s Manual

D-Link Systems, Inc.

The DCS-G900 Setup Wizard

Click

Next

Click

Finish

Click

Yes

14

DCS-G900 User’s Manual

D-Link Systems, Inc.

The DCS-G900 Setup Wizard

Your camera’s IP Address will

be displayed here along with its

corresponding MAC Address.

To run the Setup Wizard, click on:

Start

>

Programs

>

D-Link Setup Wizard

.

You must change the

Admin ID

and

Password

immediately to protect your camera against

unauthorized access. By default, the Admin ID

and Password are blank. To change the Admin

ID and Password, select both

Change

boxes and

enter a

New ID

and

New Password

.

Enter an

IP Address

and

Subnet Mask

for

your camera if you want to change the current

settings. Enter your

Gateway

and

DNS

settings.

These settings must correspond with your

network settings for you to access the camera.

If you are unsure of what these settings should

be, check with your network administrator.

Click

Next

Click

Next

Click

Wizard

15

DCS-G900 User’s Manual

D-Link Systems, Inc.

The DCS-G900 Setup Wizard

For

Connection Mode

, select either

Infrastructure

for use with a router, or

Adhoc

for a peer-to-peer

connection. The

Network Name (SSID)

,

Wireless

Channel

,

Security Mode

, and

Authentication

must

correspond with your wireless network settings for

the camera to work.

If you need to make any changes, click

Back

to

modify your settings.

Otherwise, click

Restart

to save and apply your

settings.

Click

Restart

Click

Next

Enter the

Encryption Mode

,

Key Format

, and

Encryption Keys

for your wireless network.

Click

Next