on the IPView SE, while you are connected to the camera you would like deleted. The IPView SE camera button becomes
available as soon as you click on the
Liberate Camera
button. The green light from under the camera button will become grey.
Page 67 / 92
63
How to Change the IP Address
To change a camera’s IP Address, you must highlight the camera you wish to change. Click the
Change IP Address
button and the Change IP Address dialog box will
appear. Select Manually Assign IP if you want to connect manually to the camera by providing the IP Address, Subnet Mask, and Default Gateway. Select DHCP if you
do not wish to assign an IP address to your camera.
You may also click the Assign IP to a Camera button on the IPView SE, which will bring up the Browse screen from above. Simply click the Change IP Address button
and the Change IP Address dialog box will appear. Select Manually Assign IP if you want to connect manually to the camera by providing the IP Address, Subnet Mask,
and Default Gateway. Select DHCP if you would like to connect to only cameras on your network.
Page 68 / 92
64
How to Format the Camera View
Select the
Combine
button
on the IPView SE and you should see all four cameras combined (see image below).
A maximum of 4 cameras can be viewed simultaneously with IPView SE.
Page 69 / 92
65
How to Rotate the View
In View Mode format, click on the
Rotate
button
and the image should rotate 90
°
to the left (see image below).
Page 70 / 92
66
View/List
Click the
View/List
button
. All the cameras and their properties, such as the camera name IP Address, user name, and functional information, will be displayed
in the View/List screen.
Zoom
Click the
Zoom
button
to zoom in on the camera image. The options under zoom are Fit Window x1, x1.5, x2, x2.5, x3, x3.5, and x4.
19216811.live