to open the control panel again when it is closed.
Always on Top
Click the
Always on Top
button
to have the display screen always appear on top.
Close
Click the
Close
button
to close the display screen of the camera.
Page 72 / 92
68
How to take a Snap-Shot with the Camera
In View Mode format select the
Snapshot
button
located on the upper left corner of the screen. A Save Image dialog box will appear for you to save the
snapshot picture.
Page 73 / 92
69
How to Start Recording
To start recording with a camera, click the
Manual Recording
button
. An AVI file will appear in your IPView SE folder.
NOTE:
You must stop recording before changing any camera settings.
How to Stop Recording
To stop recording with a camera, click the
Manual Recording
button
again.
Camera Settings
Once you have completed the initial configuration of the DCS-900 using the Web-based interface, you can review or change your configuration using either the
Web-based configuration utility or the Settings in the DCS-900 IPView SE.
Configure Camera from Web
Click the
Configure Camera from Web
button
to start configuring your camera from the web again (see page 24).
Page 74 / 92
70
Motion Setting
Click the
Motion Setting
button
to setup the options for motion recording. On this screen you can select to Invoke Alarm and/or Sent E-mail. Click the E-mail
Setting button to configure your E-mail. The Sensitivity Level can be adjusted between Low and High for motion recording.
Page 75 / 92
71
Manual Recording
Click the
Manual Recording
button
to begin recording images from you camera.
Schedule Recording
Click the
Schedule Recording
button
to record based on a specific time and date. Click Add to set the time and date recording.
19216811.live