To ensure the highest security and prevent unauthorized usage of your IP camera, the Administrator has the exclusive privilege to authorize all users. The DCS-900
supports multi-level password protection/access that can be restricted by the Administrator for defined users who have a User Name and User Password.
The Administrator can release a public User Name and Password so that when remote users access the DCS-900 they will be allowed to view the images transmitted
by the DCS-900.
Page 47 / 92
43
Password Setting
–
y
Admin
: Allow you to specify and save the Administrator’s ID name and password.
System Setting
–
y
Camera Name
: Allow you to specify a name for your IP camera.
y
Location
: Enter information of where your camera is located.
y
LED Control
: You can set the LED of the DCS-900 to on (Normal), off (OFF), or blink randomly (Dummy).
y
User Access Control
: Allow you to enable or disable user access control.
Define Users
–
y
Add User
: This will enable you to add users. You must click Add each time you add a user to the User List.
y
Delete User
: Select a user from the pull-down list and click the Delete button to remove the user from the list.
y
User List
: This list shows all of the users added.
Page 48 / 92
44
MAINTENANCE > Backup and Restore
The
Backup and Restore
option not only allows you to save the current configuration in a computer for backup by clicking Save button, but also allows you to reload
a configuration that you saved before by clicking Browse to direct to the backup file, and then clicking Update Settings button for reloading with rebooting the device.
Beside, you are also allowed to return your IP camera to the default settings by clicking Restore Device button, and restart the camera by clicking Restart Device
button.
Page 49 / 92
45
MAINTENANCE > Firmware Update
The
Firmware Update
option displays you the current firmware’s information of your IP camera, and also allows you to upgrade the firmware of the IP camera when a
new version of firmware is available.
First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of
your computer. Click on Browse to search the local hard drive for the firmware that you downloaded from the D-Link Website (
support.dlink.com
) to be used for the
update. Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware
upgrade.
Page 50 / 92
46
STATUS
The Status section provides the detail information about your IP camera.
STATUS> Device Info
The
Device Info
option lists the following important settings that are currently set for your DCS-900, including detail information about Device Status, Ethernet Status,
19216811.live