D-Link DCS-5610 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 80 Scroll up to view Page 31 - 35

²6

D-Link DCS-5610 User Manual

Section ² - Conﬁguration

Color:

Power line

frequency:

Video orientation:

White balance:

Brightness:

Select either for

Color

or

B/W (black and white,

monochrome)

video display.

You may need to choose 50 or 60 Hz frequency;

and nonetheless maintain the system operation at

a basic 50 Hz frequency.

Two options.

Flip

will vertically rotate the video while

Mirror

will horizontally rotate the video. You may

check both options if the camera is being installed

upside down.

Choose either Auto or Fix white balance.

It has eleven levels ranged from -5 to +5 for you to

choose.

Image Setup

You may conﬁgure the color, brightness, and orientation settings of the video image. Preview of the image will be shown

in the window of Live Video. Click

Save Settings

to save your changes.

Page 37 / 80

²´

D-Link DCS-5610 User Manual

Section ² - Conﬁguration

Mode:

Frame Size:

Maximum frame

rate:

Video quality:

Mute:

Internal

microphone input

gain:

It can be either JPEG or MPEG4. In JPEG mode,

the video frames are independent. However,

MPEG4 consumes much less network bandwidth

than JPEG.

Frame Size: Three options exist for the sizes of the

video display. You can select between

176x144

,

352x240

, or

640x480

. It is recommended using

176x144 for mobile viewing and 640x480 for

computer viewing.

1 is the minimum value while 30 is the maximum

value. It is recommended choosing 30 for computer

viewing and 5 for mobile viewing.

This limits the maximal refresh frame rate, which

can be combined with the “

Fixed quality

” to

optimize the bandwidth utilization and video quality.

If the User wants to ﬁx the bandwidth utilization

regardless of the video quality, choose “

Constant

bit rate

” and select the desired bandwidth.

Select this if you want to switch off the sound.

Select from the list to set internal microphone

input gain. It is necessary to ﬁnd the optimum

gain that transmits the best audio to whoever is

listening.

Note:

dB stands for decibels, unit of audio

measurement. More decibels as a positive value indicates that the sound is louder, while more decibels as a negative value

indicates that the sound is quieter.

Audio and Video

Two different settings for two video streams (stream 1 and stream 2) can be conﬁgured here. You may conﬁgure one

setting for computer display and the other one for mobile display.

Page 38 / 80

²µ

D-Link DCS-5610 User Manual

Section ² - Conﬁguration

External

microphone

input:

Audio type:

GSM-AMR:

AAC bit rate:

GSM-AMR bit

rate:

Select from the list to set external microphone input gain.

AAC (Advanced Audio Coding): A wide band audio coding algorithm that exploits two primary coding strategies to dramatically

reduce the amount of data needed to convey high-quality digital audio. Select a higher bit rate number for better audio

quality.

A standard adapted audio codec by the 3GPP video (3rd Generation Partnership Project). It is an Adaptive Multi Rate-Narrow

Band (AMR-NB) speech codec. Select a higher bit rate number for better audio quality.

Please select from the list, higher bit rate means higher audio quality but it takes more network bandwidth to transmit.

Page 39 / 80

²¶

D-Link DCS-5610 User Manual

Section ² - Conﬁguration

Enable motion

detection:

Window name:

Sensitivity:

Percentage:

New:

Save:

Check this option to turn on the motion detection.

Create your own name for the monitored area/

window. It will show at the top of the motion

window.

Set the measurable difference between two

sequential images that would indicate motion.

Set the amount of motion in the window being

monitored that is required to initiate a motion

detected alert. If this is set to 100%, this means

that motion is detected within the whole window

to trigger a snapshot.

Note:

Setting a higher sensitivity and a lower

percentage will make any motion more easily.

Click to add a new window. A maximum of three

motion windows can be opened simultaneously.

Use your mouse to drag the window frame to

re-size or the title bar to move. Clicking on the ‘

x

’

at the upper right corner of the window will close

the window.

Save the related settings of that window.

Motion Detection

Enabling Motion Detection will allow up to three windows that can be created with different settings for monitoring. This

allows your camera to serve as a security device that will record when motion is detected.

Page 40 / 80

³0

D-Link DCS-5610 User Manual

Section ² - Conﬁguration

Current Server

Time:

Time Zone:

Enable Daylight

Saving:

Daylight Saving

Dates:

Automatic Time

Conﬁguration:

NTP Server:

Update Interval:

Set the date and

time manually:

Copy Your

Computer’s Time

Settings:

Will be determined by the system.

Select your time zone from the drop-down menu.

Select this to enable the daylight saving time.

You may conﬁgure the daylight saving date and

time.

Enable this feature to obtain time conﬁguration

automatically from NTP server.

Network Time Protocol (NTP) synchronizes the

DCS-5610 with an Internet time server. Choose

the one that is closest to your location.

The time interval for updating the time information

from NTP server.

This option allows you to set the time and date

manually.

This will synchronize the time information from

your PC.

Time and Date

From this section, you may automatically or manually conﬁgure, update and maintain the internal system clock for your

camera.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share