Page 16 / 80
Scroll up to view Page 11 - 15
16
D-Link DCS-5610 User Manual
Section ² - Configuration
Enter the admin ID and password.
Note:
The default Admin ID is
admin
with the password left blank.
Select DHCP if you want to obtain a new IP address every time the
camera boots up.
Click
Next
Click
Next
Page 17 / 80
1´
D-Link DCS-5610 User Manual
Section ² - Configuration
Click
Next
Click
Next
Choose
UPnP Port Forwarding
if your router supports it, otherwise
choose
Manual
to enter your port numbers manually. Click
Next
to
continue.
Enable DDNS and setup your DDNS service here, if you have
subscribed to a DDNS service. Click
Next
to continue.
Page 18 / 80
1µ
D-Link DCS-5610 User Manual
Section ² - Configuration
If you want to access the DCS-5610 via mobile phone, click
Yes
and the video resolution will be set to 176x144.
Click
Apply
to apply the settings to the device.
Click
Apply
Page 19 / 80
1¶
D-Link DCS-5610 User Manual
Section ² - Configuration
Double-click the
DCS-5610
to launch the camera’s web configuration
page.
Page 20 / 80
±0
D-Link DCS-5610 User Manual
Section ² - Configuration
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
Note:
Your address may differ.
Type
Admin
in the user name field and leave the
password blank by default.
Note:
You may refer to page 51 to change the password
for your admin account.
This section will show you how to configure your new D-Link Internet Camera using the Web-based Configuration
Utility.
Click
OK
19216811.live