Page 11 / 80
Scroll up to view Page 6 - 10
11
D-Link DCS-5610 User Manual
Section 1 - Product Overview
The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet
Camera bottom socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There
are holes located in the base of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any
wall securely.
Socket for camera stand
Page 12 / 80
1±
D-Link DCS-5610 User Manual
Section ± - Installation
Turn on the computer and Insert the D-Link DCS-5610 Autorun CD in the CD-ROM drive. The step-by-step instructions
that follow are shown in Windows
®
XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, click Windows Start > Run. In the Run
command box type “
D:\DCS5610.exe
”, where D: represents the drive letter of your CD-ROM. If it does start, proceed
to the next screen.
Software Installation
Click
Installation Wizard
Page 13 / 80
1²
D-Link DCS-5610 User Manual
Section ± - Installation
Click
Next
to continue.
Click
I Agree
to accept the License Agreement.
Click
Next
Click
I Agree
Page 14 / 80
1³
D-Link DCS-5610 User Manual
Section ± - Installation
To start the installation click
Install
.
Note:
The installation may take several minutes to complete.
Click
Install
Click
Finish
Page 15 / 80
15
D-Link DCS-5610 User Manual
Section ² - Configuration
Configuration
This section will show you how to configure your new D-Link Internet Camera using the Installation Wizard.
Setup Wizard Configuration
Click on the
D-Link Installation Wizard
icon that was created in your Windows Start menu.
The Setup Wizard will appear and show the MAC address of the DCS-5610 and an IP Address (which may or may not
be correct depending on what you have your DCS-5610 connected to). If you have a DHCP server on your network,
there will be a valid IP Address displayed here.
Note:
A DHCP server is a device that supplies the same IP address.
Click
Manual Setup