1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-5300G
    5. /
  5. 23
Page 111 / 145 Scroll up to view Page 106 - 110
111
Using IP surveillance Software (continued)
Playback Program (continued)
When you successfully log in to the playback system, the main window will be
shown on the top of the screen and the display resolution will be changed to
1024x768 automatically (see previous page). There are four main areas , i.e.
display area, histogram area, control area, and status area. There are also
three visualized controls , i.e. area selection indicator, frame selection indicator,
and pull bar. These features provide much more convenience while searching
recorded video in the IP surveillance database.
Main Areas
Display Area
The display area is able to show the surveillance database of each camera by
time. You can change the video size through the display adjustment tool and the
playback method through the play control tool. Under the normal display mode
as shown in the figure below, you can just double click on the frame area to
change the frame size to 1:1 or 2.25:1.
Playback method
Display adjustment tool
Page 112 / 145
112
Using IP surveillance Software (continued)
Playback Program (continued)
Histogram Area
The histogram is an interactive control. Not only can you get the event’s location
in time domain and its quantity of the motion percentage, but you can also select
a group of events or a period from the event histogram area and show it on the
display area.
Control Area
The control area contains almost all the control selectors and toolboxes you
need to browse the database. These control tools include location selector,
period selector, playback method selector, jog dial, display adjustment tool,
searching range adjustment tool, exporting tool, and system control tool. These
tools are discussed in more detail in the section titled “Using Tools.”
Status Area
The status area is located at the bottom of the main window. It tells you the
program status information including display mode, display size, display speed,
exporting file format, and exporting file name.
Indicators
Area Selection Indicator
In the main playback window, the display area is surrounded by a blue rectangle.
This rectangle is the area selection indicator. This indicator can be set to either
display area or histogram area, as long as you move your mouse cursor to the
area you intend to select. When you select the display area, the display
adjustment tool will appear in the control area. If you select the histogram area,
the display adjustment tool will disappear and the searching range adjustment
tool will be shown in the same place of the control area.
Page 113 / 145
113
Using IP surveillance Software (continued)
Playback Program (continued)
Pull Bar
The pull bar is a fast, flexible control for seeking data in the selected time period.
It represents the total length of time in that period. You can pull the indicator on
the pull bar to the specific time-point you would like to view. The displaying
video will halt and then restart, playing the video sequence from the point you
selected. If the video sequence has been paused, the display area will show
the point you selected without playing. Note that the pull bar will only function
under the normal display mode.
Settings
After the main window is shown on the screen, you must modify the settings to
make it to work properly. Click on the “Settings” button, shown below, in the
system control tool, and the setting dialog will appear on the screen.
Lock Windows
Settings
Minimize
Exit
Page 114 / 145
114
Playback Program (continued)
Using IP surveillance Software (continued)
Database location
The most important item in the settings dialog is the database
location setting. You must set it to the directory that contains the
surveillance database to make the program to work properly.
The items in the settings windows are:
Modulation Mode:
The modulation mode cannot be changed. This depends on how
you recorded the video sequence in the monitor program. If you
select the wrong mode, the video shown in the display area will
become distorted. If you have chosen the wrong modulation
mode, you may open the settings dialog again, change to the
correct mode, and restart the playback program. The display will
now be normal.
±
±
±
±
AVI file location
This sets the
directory where exported
AVI files will be stored.
Exported AVI files will be stored in the sub-directory (camera
name) under the directory you set here.
Snapshot file location
This sets the directory where bitmap files will be stored when
you use the snapshot to export them. Exporting bitmap files will
be stored in the sub-directory (camera name) under the directory
you set here.
Page 115 / 145
115
Playback Program (continued)
Using IP surveillance Software (continued)
Normal (Single Frame) Mode
Period Start Time Label
Period End Time Label
Histogram Area
Under the normal display (single frame) mode, you can use all the tools provided
with the playback program, except the page control. In this mode, the two labels
under the pull bar show the starting and the ending time of the interval individually
(as shown above).
(1) Changing the database path in the settings dialog of “System Control” tool.
(2) Changing the location selector to another location in control area.
(3) Changing the playback method selector to “Full Range.”
(4) Changing the playback method selector to “Time Period.”
While in the normal (single frame) display mode, you can change the video
currently displayed by:

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top