Page 91 / 145
Scroll up to view Page 86 - 90
91
Using IP surveillance Software (continued)
Step 2:
Press and hold the left mouse button, and then move the cursor to a
display window in the video area, which is shown below. Note that the cursor
will change according to the area in order to indicate whether the area is
droppable or not.
Video 1
Droppable area
Not droppable area
Step 3:
Release the left mouse button while on top of a display window. In each
display layout, only one window can be assigned to a camera. Also, each camera
must have its own separate window when displayed. Once the video is in a
display window, it can be dragged and dropped to other windows. If you drag
one camera’s video to a window that already has its own camera’s video, the
two cameras will trade display windows. Dragging and Dropping is a very
convenient way to manipulate the video channels in the IP surveillance Software.
Monitor Program (continued)
Window A
Window B
Page 92 / 145
92
Using IP surveillance Software (continued)
Video shown
Empty video box
Removing video from a display window
Step 1:
Move the mouse cursor to the display window that contains the video
channel you wish to remove.
Step 2:
Note that the cursor will change to the hand-shape when it has been
moved onto the displaying frame. After that, press the left mouse button and
hold it.
Step 3:
Move the cursor, while still holding the left mouse button, to the trashcan
in the common area of the monitor program.
Step 4:
When the cursor shape changes to an arrow-shape over the trashcan,
release the left mouse button. The video in the corresponding display window
will disappear. All operations above are shown in the figure on the following
page.
Monitor Program (continued)
Page 93 / 145
93
Using IP surveillance Software (continued)
Press and hold the left
mouse button here.
Move the mouse cursor
here, and then release
the left mouse button.
The Layout
There are six different layouts available, as shown below, for the display
windows in the monitor program. You can select one of them by clicking on
a layout icon. In each layout, you can drag and drop the “channel number” to
any display window in the video area. Following the procedures described
in the section titled “Show the video of a specified channel”, you can add
the video channels to display windows within the selected layout one by
one. You can also exchange the video between different display windows
by dragging and dropping.
4 camera layout
9 camera layout
1 camera layout
6 camera layout
13 camera layout
16 camera layout
Monitor Program (continued)
Page 94 / 145
94
Using IP surveillance Software (continued)
Double click a display
window to switch to a
single channel layout.
When you choose the one-channel layout or four-channel layout, the “Page up”
and “Page down” buttons will be shown in the left-bottom corner of the video
area. You can use these two buttons to switch the pages, as shown in the
figure below.
Use to switch between
cameras.
Monitor Program (continued)
Page 95 / 145
95
Using IP surveillance Software (continued)
To view an individual camera from the multi-camera layout, double-click on the
desired display window. You will see that the size of the display window is the
same as the one-channel layout. Clicking the “Back” button in the upper-left
corner of the video area will switch to the previous selected multi-camera layout.
The position that each video channel is in for every layout will be saved for the
next time the layout is selected.
Back
Back to previous
layout.
Monitor Program (continued)
Input/Output Control Tools
Digital Input /
Digital Output
Alert Message
Pan/Tilt control
19216811.live