3³

D-Link DCS-34±0 User Manual

Section 3 - Configuration

Security:

Pre-shared Key:

Auth mode:

Key Lenght:

Key Format:

Default Key:

Select the encryption type from the drop-down list. The default setting for the encryption is None, which

means the security is disabled.

This Key allows the camera to connect to other devices by using WPA-PSK encryption. Pre-shared key

must be 8-63 characters or 64 hex characters.

Choose one of the following authorization modes:Open Autenication- Communicates the key across

the network. Shared Authentication- Allows communication only with other devices with identical WEP

settings.

Select the key length, either 64 or 128 bits.

Select an ASCII or hexadecimal key format.

You can create up to 4 different security keys.

3´

D-Link DCS-34±0 User Manual

Section 3 - Configuration

The domain name or IP address of the

external mail server.

The user name used to log into your e-mail

account (e.g. jdoe or [email protected]

depending on your ISP).

The password used to log into your e-mail

account. (The password will appear as

dots instead of entered characters.)

The e-mail address of recipients for

snapshots or a system log file.

The domain name or IP address of a

secondary mail server used only if the

primary mail server is unreachable.

The user name for the second SMTP

server.

The password used to log into the

second e-mail account. (The password

will appear as dots instead of entered

characters.)

The e-mail address of recipients for the

secondary server.

SMTP (mail)

server 1:

Mail & FTP

SMTP account

name 1:

SMTP

password 1:

Recipient email

address 1:

SMTP (mail)

sever 2:

SMTP account

name 2:

SMTP

password 2:

Recipient email

address:

38

D-Link DCS-34±0 User Manual

Section 3 - Configuration

The sender’s email address that appears in the mail alert.

It can be other than default port 21. If you find that you want to change the port to a port number

other than

21, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60

(if you are to use port 60 for your FTP server port)

The host name of the FTP server.

The port of the FTP server. Usually the port number of FTP server is 21. It depends on the FTP server’s

setup.

The account name to access the FTP server.

The password that was setup with the account to access the FTP server.

The directory that the images will be uploaded into (For example, \pub\images).

Allows access to an external FTP sever if your camera is behind a router protected by a firewall.

The 2nd FTP server serves as a backup FTP server.

The account name to access the FTP server.

Sender Email

Address:

Local FTP

server port:

1st FTP

server:

1st FTP user

name:

1st FTP

password:

1st

FTP remote

folder:

1st FTP Passive

Mode:

2nd FTP

server:

2nd FTP user

name:

1st FTP

server port:

3µ

D-Link DCS-34±0 User Manual

Section 3 - Configuration

Dynamic DNS (Domain Name Service)

is a method of keeping a domain

name linked to a changing (dynamic)

IP address. With most Cable and

DSL connections, you are assigned a

dynamic IP address and that address is

used only for the duration of that specific

connection. With the DCS-3420, you

can set up your DDNS service and the

DCS-3420 will automatically update your

DDNS server every time it receives a

different IP address.

Check to enable the DDNS function.

Select your Dynamic DNS provider

from the drop down menu.

Enter the host name of the DDNS

server.

Enter your username or e-mail used to connect to the DDNS server.

DDNS:

DDNS & UPnP

The password that was setup with the account to access the FTP server.

The directory that the images will be uploaded into (For example, \pub\images).

Passive mode setting for the backup FTP server.

2nd FTP remote

folder:

2nd FTP passive

mode:

Enable DDNS:

Provider:

Host Name:

Username/E-mail:

2nd FTP

password:

40

D-Link DCS-34±0 User Manual

Section 3 - Configuration

Enter your password or key used to connect to the DDNS server.

UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility

among networking equipment, software, and peripherals. The DCS-3420

is a UPnP enabled Internet camera.

If your operating system is UPnP enabled, the device will be easier to configure. If you do not want to use

the UPnP functionality, it can be disabled by unselecting the

Enable UPnP

check box.

Password/Key:

UPnP:

Video

Select the option for color or monochrome

video display.

Three options exist for the video display:

176 x 120, 352 x 240, and 704 x 480.

In 704x480 mode, the frame rate will be

reduced to 10fps and increased to 30fps

automatically when it is switched back

to a lower image size.

Limits the maximum refresh frame

rate. The frame rate is used with the

Video quality control

setting (below)

to optimize bandwidth utilization and

video quality.

The keyframe interval value tells the

camera how often to re-evaluate the

video image and record a full frame, or

keyframe, into the video stream.

Color:

Size:

Maximum

frame rate:

Key Frame

Interval: