Page 21 / 149
Scroll up to view Page 16 - 20
±1
D-Link DCS-34±0 User Manual
Section 3 - Configuration
Click
Apply
to save the configured settings. Users can click
Previous to modify changes.
Click
Apply
Page 22 / 149
±±
D-Link DCS-34±0 User Manual
Section 3 - Configuration
The upgrade window allows users to upload the
firmware. If the firmware is older than the current one
on the camera, a screen shot will appear indicating this,
prompting the user to confirm the uploading.
Upgrade
Page 23 / 149
±3
D-Link DCS-34±0 User Manual
Section 3 - Configuration
UPnP (Universal Plug and Play) is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The
DCS-3420 is an UPnP enabled Internet camera. If your operating system is
UPnP enabled, the device will be easier to configure. If you do not want to use
the UPnP functionality, it can be disabled by unchecking the
Enabled UPnP
checkbox in the
Advanced > Network
page (see page 33). Use the following
steps to enable UPnP settings only if you are running Windows
®
XP. If you are
running Windows
®
98/2000, UPnP is not available.
Go to
Start
>
Settings
. Click Control Panel.
Enabling UPnP for Windows
®
XP
Click
Add or Remove Programs
Page 24 / 149
±4
D-Link DCS-34±0 User Manual
Section 3 - Configuration
The following screen will appear.
Select
Networking Services.
Select
Universal Plug and Play
.
Click
Details
Click
Add/Remove Windows Components
Click
OK
Page 25 / 149
±²
D-Link DCS-34±0 User Manual
Section 3 - Configuration
Please wait while Setup configures the components.
Click
Next
Click
Finish
19216811.live