16

Installation Wizard Screen (continued)

Reset to Default -

About -

Exit -

Click the Exit tab to exit the Installation Wizard screen.

Click About to display the

current

version and date.

Click the Reset to Default tab to reset the camera’s settings to factory defaults.

Locate the Firmware to Upgrade -

Indicate the location of the firmware to be uploaded to the camera.

Selected Package -

This displays the file name of the firmware selected for upload.

17

Enabling UPnP for Windows XP/Me

UPnP is short for Universal Plug and Play, which is a networking architecture

that provides compatibility among networking equipment, software, and

peripherals. The

DCS-2000

is a UPnP enabled Internet camera. If your operating

system is UPnP enabled, the device will be easier to configure. If you do not

want to use the UPnP functionality, it can be disabled by unchecking the Enabled

DDNS check box on the DDNS/UPnP settings page under “Advanced” in the

configuration menu. Use the following steps to enable UPnP (Universal Plug

and Play) settings only if you are running Windows XP/Me. If you are running

Windows 98/2000, UPnP is not available.

Click

Control Panel

±

Go to

Start >Settings

.

Click

Add or Remove

Programs

18

Click

Add/Remove

Windows Components

The following screen will

appear:

Select

Networking Services

(Communications in Windows

Me

Click

Details

Select

Universal

Plug and Play

Click

Ok

Enabling UPnP for Windows XP/Me

(continued)

19

Please wait while Setup

configures the components.

Click

Next

Click

Finish

Enabling UPnP for Windows XP/Me

(continued)

20

Click

My Network Places

To view your

DCS-2000

Internet Camera in an Internet

browser, go to your Desktop

and click

My Network

Places

.

Click

DCS-2000-100

The last three digits (100),

represent the fourth octet of your

Internet Camera’s IP address

(in this example, 198.168.0.100).

After you click on the

DCS-2000-

100

icon,

your Internet browser

will automatically be opened to

the IP Address of the

DCS-2000

,

in this example it is: http://

192.168.0.100. Your

DCS-2000

may have a different IP

Address.

(Note: Screen shots are taken in Windows XP, similar screens will appear in Windows Me.)

Enabling UPnP for Windows XP/Me

(continued)