D-Link DCS-2000 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

D-Link

DCS-2000

Page 36 / 140 Scroll up to view Page 31 - 35

Home > Configuration

Click on the Configuration button on the Home page:

There are 5 tabs across the top of the

Configuration

screen. From each tab,

different elements of the

DCS-2000

can be configured. The

Advanced

tab is

the default screen in

Configuration

and

Network

is the default screen

under

Advanced

Using the DCS-2000 with an Internet browser

(continued)

Click

Configuration

Any changes made to these settings will

require the system to restart. Make sure

every field is correct before clicking on

Apply

Page 37 / 140

Configuration > Advanced > Network

Reset IP Address at next boot

Using the DCS-2000 with an Internet browser

(continued)

Once the DCS-2000 is configured, this box should be unchecked at all times. If

the box has been checked and the connection is lost, run

Installation Wizard

to find the camera’s IP address.

IP address -

Necessary for network identification.

Subnet mask -

Used to determine if the destination is in the same

subnet. The default value is “255.255.255.0.”

SMTP

SMTP (mail) server 1

The domain name or IP address of external mail

server.

SMTP account name 1 -

The user name used to log into your e-mail

account (e.g. jdoe or [email protected]

depending on your ISP).

SMTP password 1 -

The password used to log into your e-mail

account. (The password will appear as dots

instead of entered characters.)

Recipient email address 1 -

The e-mail address of recipients for snapshots

or a system log file. Multiple recipients must be

separated by a semicolon “;”

Default router -

The router used to forward frames to destinations

in a different subnet. Invalid router settings will

cause the failure of transmissions to different

subnets.

Primary DNS -

Primary domain name server that translates names

to IP addresses.

Secondary DNS -

Secondary domain name server to backup the

primary one.

General

SMTP(mail) server 2 -

The domain name or IP address of a secondary

mail server used only if the primary mail server

is unreachable.

Page 38 / 140

FTP Settings

Configuration > Advanced >Network Settings (continued)

1st FTP server -

The e-mail address of recipients for the secondary

server.

The return e-mail address to use if the snapshot

or system log e-mail fails to send. (This

address should be within the SMTP server’s

domain for authentication purposes.)

Return email address

Recipient email address 2 -

Using the DCS-2000 with an Internet browser

(continued)

Granted folder on the external FTP server. The

string must conform to the external FTP server.

Some FTP servers cannot accept a preceding

slash symbol before the path if there is no virtual

path mapping. Refer to the instructions of the

external FTP server for details. The folder

privilege must be open for upload.

1st FTP remote folder -

Granted password on the external FTP server.

Granted user name on the external FTP server.

1st FTP user name -

The domain name or IP address of the external

FTP server. The following user settings must be

correctly configured for remote access.

Can be other than default port 21. If you find that

you want to change the port to a number other

than 21, you will need to specify the port when

connecting to the FTP server. For example

FTP://68.5.1.81:60 (if you are to use port 60 for

your FTP server port)

Local FTP server port -

1st FTP password -

The user name for the second SMTP server.

SMTP account name 2 -

The password used to log into the second e-mail

account. (The password will appear as dots

instead of entered characters.)

SMTP password 2 -

Page 39 / 140

Can be set to other than the default port 80. When

the administrator changes the HTTP port of the

DCS-2000

(which has an IP Address of

192.168.0.100) from 80 to 8080, users must type

“http://192.168.0.100:8080” in the Web browser

instead of “http://192.168.0.100”.

HTTP Port-

Using the DCS-2000 with an Internet browser

(continued)

2nd FTP user name -

Granted user name on the backup FTP server.

2nd FTP password -

Granted password on the backup FTP server.

2nd FTP server -

The domain name or IP address of the external

FTP server. Note that the 2nd FTP server will only

be used if the 1st FTP server is unavailable. If

the image upload to the 1st FTP server is

successful, no attempts will be made to connect

to the 2nd FTP server.

2nd FTP remote folder -

Granted folder on the backup FTP server.

Mode -

Passive mode setting for the backup FTP server.

Secondary FTP passive

HTTP Settings

Click Apply to make

changes effective

If the

DCS-2000

is located inside the network

protected by firewall, a data connection for FTP

may be prohibited. Passive mode FTP can bypass

the rule and succeed to upload snapshots. If the

passive mode is selected, the

DCS-2000

can

automatically attempt for an active mode if the

external FTP server does not support passive

mode.

Primary FTP Passive

Mode-

Page 40 / 140

Streaming Screen under “Advanced Network”

Control channel port -

Can be set to a port other than the default port

5001. A corresponding port must be opened on

your firewall.

Audio channel port -

Can be set to a port other than the default port

5002. A corresponding port must be opened on

your firewall.

Video channel port -

Can be set to a port other than the default port

5003. A corresponding port must be opened on

your firewall.

Improve audio quality

in low bandwidth

environment -

In a low bandwidth network environment you can

check this option to improve

audio quality by

sacrificing some real-time synchronization

Using the DCS-2000 with an Internet browser

(continued)

Click Apply to make

changes effective

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share