D-Link DCS-2000 Router Manual PDF (Setup & Configuration Guide)

Page 51 / 140 Scroll up to view Page 46 - 50

51

Configuration > Tools > System

Manual

-

Adjust the date and time according to what is

entered by the administrator. Notice the format in

the related field while typing.

Automatic

-

Synchronize with the NTP server over the Internet

whenever the

DCS-2000

starts up. It will fail if the

assigned time server cannot be reached.

NTP server -

Assign the IP address or domain name of the

time server. Leaving the text box blank will let

DCS-2000

connect to default time servers.

Time zone

-

Used to adjust the hour of time servers for local

settings.

Keep current date and

time -

Using the DCS-2000 with an Internet browser

(continued)

Synchronize the date and time of

DCS-2000

with the local computer. The date and time of

the PC is displayed and updated in the

DCS-2000

.

Sync with computer time-

Click Apply to make

changes effective

Click to save the current date and time of

DCS

-

2000

. An internal real-time clock maintains

the date and time even when the power is off.

Page 52 / 140

52

Using the DCS-2000 with an Internet browser

(continued)

Configuration > Tools > Applications

Click on the

Applications

button to access the Applications

settings from the

Tools

menu.

Page 53 / 140

53

Configuration > Tools > Applications (Continued)

Weekly schedule:

Sunday through Saturday -

Select the weekdays that should perform the

following operations:

Snapshots begin at

-

Snapshots stop at

-

Sets the time to stop the operations.

All of the time except for

the above schedule -

If you do not wish to set a schedule, this box must

be checked.

Event operation

Delay second(s) before

detecting next event -

Sets the time delay before restarting to check the

trigger condition when the current condition is

triggered.

Take snapshots at second(s)

after event -

After a snapshot is taken because of a trigger,

another snapshot will be taken after the configured

time in seconds.

Trigger condition -

There are 4 conditions related to the digital input

and three windows for motion detection. There

can be multiple selections. Select the appropriate

digital input condition according to the

characteristics of the external device. “High”, “low”

indicate external voltage input for level trigger,

while “rising”, “falling” is for edge triggers. There

are three windows shown for the names you

defined for

motion detection. “Undefined” will

show instead of the window title if motion detection

is not setup yet. An active, named motion window

must be checked for motion detection to be

possible.

Reset output -

Check and save this option to reset the external

device at the digital output back to the original

state.

Using the DCS-2000 with an Internet browser

(continued)

Set the time to start operations. Setting the

begin

time the same as the

stop

time will force the

operations to run continuously.

Page 54 / 140

54

Snapshot every second(s) -

The

DCS-2000

will send snapshots at the specified

interval to the external server according to the

chosen method. Remember this operation is

dependent to the weekly schedule.

Send snapshots by email -

Any upload action specified in the options above

will use the method chosen here. The captured

snapshot named “video.jpg” will be attached in

the email with subject “Periodic snapshots.”

Send snapshots by FTP -

The captured snapshots will upload to the external

FTP server with the file name depending on the

next option. It can be used to refresh the captured

image stored in the external Web server to build

creative homepages.

If the suffix is added, the captured date and time

can be easily differentiated from the snapshot file

name in either sequential or event operation. For

instance, “[email protected]” means

the JPEG image was captured at 4 minutes and 5

seconds after 3 o’clock, January 2nd, A.D. 2002.

If the suffix is omitted, the file named “video.jpg”

on the external FTP server will be refreshed at

the specified interval.

Configuration > Tools > Applications (Continued)

Trigger action -

There are four options for two actions regarding

either trigger condition. They can have multiple

selections. While choosing the trigger output

alarm, the digital output will short both pins to

connect the circuit of the attached external

device; otherwise both pins will be open. While

choosing to upload snapshots, the method can

be either email or FTP. The snapshot names will

be

“videopre.jpg”,

videotrg.jpg”,

and

“videopos.jpg” respectively for the snapshots

before event, right upon event, and after event.

The date and time suffix may be added according

to the option. Confirm the external mail or FTP

server settings in network configuration.

Sequential operation

Using the DCS-2000 with an Internet browser

(continued)

FTP put snapshots with

date and time suffix -

Page 55 / 140

55

Configuration > Tools > Default

Click on the

Default

button to access the option to restore to factory default

settings.

Click

Apply

on this screen to restore factory default settings. This means

any

changes made will be lost and the system will be reset to the initial status when

shipped from the factory. After confirmation, the system will restart and require

the

Installation Wizard

software program to locate the IP address of the

DCS-

2000

.

Using the DCS-2000 with an Internet browser

(continued)

Click

Apply

to make

changes effective

Click

Default

Configuration > Status > Device Info

Click on the

Status

tab

to access

Device Info

and a

Log

of

DCS-2000

system

activity. The

Device Info

is the default screen when you click on the

Status

tab.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share