Page 61 / 140
Scroll up to view Page 56 - 60
61
Next, click the
Applications
button under the
Tools
tab to set the application
settings for the
DCS-2000
.
In this window, follow the steps below to set the application settings for
snapshots to be recorded to an FTP site:
c
Select the weekdays you would like to record and enter the
“Snapshots begin” time and “Snapshots end” time for the weekly
schedule, or select “All the time except for the above schedule” if you
want to enable full time snapshot recording.
d
Check “Event operation.”
e
Set the delay “before detecting next event” to avoid continuous false
alarms following the original event.
f
Set the delay to “take snapshots after event” to capture the direction
of the moving object.
5
Check the window name (in this case Back Door).
6
Check “Upload snapshots while motion detected.”
7
Click “Send snapshots by FTP” and check “FTP put snapshots with
date and time suffix”
8
Click the “Apply” button to save the settings.
Click
Applications
Click the apply button when finished. You are now able to record snapshots to
your FTP server when motion detection is triggered.
X
X
X
X
X
X
Back Door
Record Snapshots to your FTP server with
Motion Detection (continued)
Page 62 / 140
62
Using IP surveillance Software
Installing the IP surveillance Software
Before you begin installing this application software, the hardware system
requirements must be checked first. The system minimum requirements
recommended for this application are as follows:
Hardware System Requirements
Browser: Internet Explorer 5.x or above
CPU: Intel Pentium III 800GHz or above
SDRAM: 128 MB SDRAM
Hard Disk: 40GB
Video Card: nVidia, TNT, TNT2, GeForce series with 32 MB Display memory
ATI Radeon series with 32 MB Display memory
Software Installation
Put the installation disk into your CD-ROM, and it will run automatically. If it
does not, open “My Computer” and double click on the CD-ROM icon. Next the
installation menu will appear. Click “Install Software”. The following window will
appear.
Click
IP surveillance
Page 63 / 140
63
Using IP surveillance Software (continued)
The “License Agreement” window below will appear. Please read the following
license agreement carefully. Click “Yes” to accept this agreement and proceed
with the installation.
Click
Next
Click
Yes
Installing the IP surveillance software (continued)
Page 64 / 140
64
Using IP surveillance Software (continued)
Next, the “User information” window below will appear. This window will prompt
you to enter the user name and company name. Enter your user name and
company name and then click “Next” to continue.
Click
Next
You must setup the administrator’s password in order to proceed. Input and
confirm your password in the window shown in below. Click “Next” to continue.
Click
Next
Installing the IP surveillance software (continued)
Page 65 / 140
65
Using IP surveillance Software (continued)
Select the installation directory for this application software and click “Next”,
which is shown in the figure below. You can change the installation directory by
clicking “Browse…”
Click
Next
Select a program folder to install the application software and then click “Next”,
which is shown in the figure below.
Click
Next
Installing the IP surveillance software (continued)
19216811.live