31

D-Link DCS-1100/1130 User Manual

Section 4 - Configuration

Here, you can set the camera to take snapshots when motion is detected.

Snapshots can be sent to an e-mail address and/or to an FTP server.

Enable Snapshot

: Check this box to enable the snapshot feature.

Event Based (Motion Detection)

: This will set the camera to take a

snapshot whenever motion is detected.

Continuous (FTP only)

: This will set the camera to take snapshots

continuously at intervals specified in

FTP Server > Interval

below. You

can only save to an FTP server when taking continuous snapshots.

Scheduled (FTP only)

: This will set the camera to take snapshots

continuously at intervals specified in

FTP Server > Interval

below

according to schedule you define by checking days and entering the

times you want to record between. You can only save to an FTP server

when taking scheduled snapshots.

Setup > Snapshot

32

D-Link DCS-1100/1130 User Manual

Section 4 - Configuration

E-mail Address

: When checked, the camera will send the snapshots it

takes to the e-mail address specified in the following text boxes. If you

do not know what to enter for the User Name, Password, or SMTP Mail

Server, contact your e-mail service provider for details.

User Name

: Enter the username or login name for your e-mail

account.

Password

: Enter the password for your e-mail account.

SMTP Mail Server

: Enter the SMTP server for your e-mail account.

Sender E-mail Address

: Enter the e-mail address you want to appear

as the “From:” e-mail address in the snapshot e-mail.

Recipient E-mail Address

: Enter the e-mail address you want to send

your snapshots to.

Port

: Enter the port used by your SMTP server.

Test

: Clicking this button will take a snapshot and will try to upload it to

your FTP server using the settings you have entered.

33

D-Link DCS-1100/1130 User Manual

Section 4 - Configuration

FTP Server

: When checked, the camera will send the snapshots it takes

to the e-mail address specified in the text fields. If you do not know what

information to enter, contact the administrator of the FTP server for

details.

User Name

: Enter the User Name of your FTP account.

Password

: Enter the Password of your FTP account.

Host Name

: Enter the Host Name of your FTP account.

Path

: Enter the file path to the location on the FTP server you want to

send snapshots to.

Filename Prefix

: Enter the prefix you want to attach to your snapshot

files.

Port

: Enter the port used by the FTP server.

Interval

: Enter the time interval the camera will wait before taking a new

snapshot.

Passive Mode

: If your FTP server requires you to use passive mode,

check this box.

Test

: Clicking this button will take a snapshot and will try to upload it to

your FTP server using the settings you have entered.

After making any changes, click the

Save Settings

button to save

your changes, or click the

Don’t Save Settings

button to discard your

changes.

34

D-Link DCS-1100/1130 User Manual

Section 4 - Configuration

Here you can change the Admin password, add and manage Users, and

adjust some camera settings.

Admin Password Setting

: This section lets you change the admin

password used to log in to the camera and adjust settings. After installing

the camera for the first time, it is highly recommended that you change

the admin password for security purposes.

New Password

: Enter the new admin password.

Retype Password

: Enter the new admin password again for verification.

After entering the new password again, click on the

Save

button to save

your changes.

Add User Account

: The admin can create user accounts to allow others

to log in to your camera to view the live camera feed.

User Name

: Enter the User Name you wish to use for the new user

account.

New Password

: Enter the password for the new user account.

Retype Password

: Re-enter the password for the new user account for verification. After entering the password

again, click

Add

to add the new user account.

User List

: Here, you can view the current list of users by using the dropdown box. You can also delete a user by

Maintenance > Admin

Maintenance

35

D-Link DCS-1100/1130 User Manual

Section 4 - Configuration

selecting them with the dropdown box, and then clicking the

Delete

button.

Device Setting

: Here, you can change various other settings for your

camera.

Camera Name

: Enter the name of your camera.

Enable OSD

: This will enable the information bar On Screen Display

(OSD) to appear when viewing video.

Label

: This is the text label that will appear on the OSD.

Show time

: If checked, the current time will be displayed on the OSD.

LED light

: This will turn the camera’s front LED indicator on or off.

After making any changes to this section, click the

Save

button to save

your changes.