Page 16 / 63
Scroll up to view Page 11 - 15
11
D-Link DCS-1100/1130 User Manual
Section 2 - mydlink Portal
The Camera Info tab shows you various information about your camera.
Device Name:
The Device Name is a unique name that you can give to
your device to help you identify it. Clicking on the
Device Name
will open
a window for you to log in to your camera’s configuration interface. Then,
it will open the Maintenance > Admin page where you can change your
Device Name.
Camera Password:
This shows you the current password for your camera’s
configuration interface. Clicking on the
Show Password
checkbox will
either show or hide the password. Clicking on the
Password
will open a
window for you to log in to your camera’s configuration interface. Then,
it will open the Maintenance > Admin page where you can change your
Password.
mydlink No.:
This shows you the mydlink number of your device.
Model Name:
This shows you the model name of your device.
MAC Address:
This shows you the MAC address of your device.
Device activated On:
This shows you the time and date that your device
was added to mydlink.
Support:
This section provides you with links to various support websites
and downloads related to your product.
Camera Info
Page 17 / 63
12
D-Link DCS-1100/1130 User Manual
Section 3 - Installation
Insert the Installation CD-ROM into your computer’s CD-ROM drive to start the autorun program.
The CD-ROM will open the Camera Installation Wizard. Simply click
Start
to go through the Installation Wizard, which
will help you through the entire installation process from connecting your hardware to configuring your camera.
Starting the Camera Installation Wizard
Installation
Page 18 / 63
13
D-Link DCS-1100/1130 User Manual
Section 3 - Installation
Hardware Installation
Attach the Antennas (DCS-1130 only)
Screw the wireless antennas onto the antenna connectors.
Connect the Camera to the Camera Base
1. Screw the two camera base pieces together.
2. Screw the camera base into the mounting point on either the back
or the bottom of the camera and tighten the collar.
You can adjust the angle and pivot of the camera by loosening the
wheel and retightening it after moving it to the desired position.
Page 19 / 63
14
D-Link DCS-1100/1130 User Manual
Section 3 - Installation
Connect the Ethernet Cable
Connecting to a router
Connecting to a broadband modem
Connect one end of the blue Ethernet cable included in your package to the Ethernet port on the back of the
DCS-1100/1130 camera. Connect the other end of the cable to an available LAN port on your router or broadband
modem.
Attach the power adapter to the power jack located on the back of the DCS-1100/1130
and connect the power adapter to a power outlet. After connecting the power adapter,
you should see the status LED on the front of the camera turn on.
The status LED will light red when it receives power, will light green after the camera
connects to the network, and will flash green when the camera is being accessed.
Connect the Power Adapter
Page 20 / 63
15
D-Link DCS-1100/1130 User Manual
Section 3 - Installation
Connecting to a Wireless Network Using WPS (DCS-1130)
If your router supports WPS connection, you can connect your camera using the WPS button on the camera.
Press and hold the WPS button on the side of the camera for three seconds.
The status LED on the front of the camera will turn blue.
Press the WPS button on your router within 60 seconds. The WPS button is
usually on the front or side of your router. On some routers, you may need to
log in to the web interface and then click on an onscreen button to activate
the WPS feature. If you are not sure where the WPS button is on your router,
please refer to your router’s User Manual.
The DCS-1130 will then automatically create a wireless connection to your
router. While connecting, your camera’s LED will flash and then your camera
will reboot. After rebooting, the status LED on the front of the camera will
turn solid green.
19216811.live