Page 11 / 63
Scroll up to view Page 6 - 10
6
D-Link DCS-1100/1130 User Manual
Section 1 - Product Overview
Hardware Overview
Back
Power jack
Connects to the power adapter.
Ethernet
port
Connects to a PC or network through
an Ethernet connection.
Antenna connectors (DCS-1130)
Connects to the wireless antennas.
Camera base mounting points
Allows you to attach the camera
base or another mounting unit.
Page 12 / 63
7
D-Link DCS-1100/1130 User Manual
Section 2 - mydlink Portal
mydlink Portal
After registering your DCS-1100/1130 camera with a mydlink account in the Camera Installation Wizard. You will be
able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account,
you will see a screen similar to the following:
Page 13 / 63
8
D-Link DCS-1100/1130 User Manual
Section 2 - mydlink Portal
Camera Status
A green checkmark indicates that your camera is online and ready to
use.
A yellow exclamation point indicates that your camera is online, but
the camera password has changed. You will need to enter your new
camera password to access your camera again.
A red x indicates that your camera is offline and currently cannot be
accessed remotely.
If your camera is offline, try the following:
• Check to make sure that the Internet connection to your camera
is working properly.
• Try restarting your Internet router.
• Check your camera’s cable connections and make sure they are
secure.
• Check to make sure that the LED on your camera is lit solid
green.
If you still cannot access your camera, reset your camera and run the
Camera Installation Wizard again from the CD-ROM included in your
package.
Here, you can see the online status of each of your cameras. Your online status may be one of the following:
Page 14 / 63
9
D-Link DCS-1100/1130 User Manual
Section 2 - mydlink Portal
Live Video
In the main part of the screen, the Live Video tab will be selected by default. If the camera is available, a Live Video
feed will be displayed. Video will be shown at VGA resolution (640x480) if viewing your camera from a PC on the same
local network, or at QVGA resolution (320x240) if viewing your camera from a PC on a remote network.
Page 15 / 63
10
D-Link DCS-1100/1130 User Manual
Section 2 - mydlink Portal
Camera Settings
The Camera Settings tab allows you to access your camera’s configuration interface. To open your camera’s configuration
interface, click
Camera web page
and enter the password exactly as listed on the Camera Settings page.