1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DAP-1522
    5. /
  5. 6
Page 26 / 100 Scroll up to view Page 21 - 25
26
D-Link DAP-1522 User Manual
Section 3 - Configuration
Network Settings
DHCP
This section will allow you to change the local network settings of the access point and to configure the DHCP
settings.
LAN Connection
Type:
Device Name:
Use the drop-down menu to select Dynamic IP
(DHCP) to automatically obtain an IP address on
the LAN/private network.
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
Page 27 / 100
27
D-Link DAP-1522 User Manual
Section 3 - Configuration
LAN Connection
Type:
Access Point IP
Address:
Subnet Mask:
Default Gateway:
Device Name:
Use the drop-down menu to select Static IP if your
ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. Select
Dynamic IP (DHCP) to automatically assign an
IP address to the computers on the LAN/private
network.
Enter the IP address of the access point. The default
IP address is 192.168.0.50. If you change the IP
address, once you click
Apply
, you will need to enter
the new IP address in your browser to get back into
the configuration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in
the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access
point will not accept the IP address if it is not in this format.
Page 28 / 100
28
D-Link DAP-1522 User Manual
Section 3 - Configuration
Advanced
MAC Address Filter
The MAC address filter section can be used to filter network access by machines based on the unique MAC addresses
of their network adapter(s). It is most useful to prevent unauthorized wireless devices from connecting to your network.
A MAC address is a unique ID assigned by the manufacturer of the network adapter.
Configure MAC
Filtering:
Add MAC
Filtering Rule:
When “Turn MAC Filtering OFF” is selected,
MAC addresses are not used to control network
access. When “Turn MAC Filtering ON and
ALLOW computers listed to access the network”
is selected, only computers with MAC addresses
listed in the MAC Address List are granted network
access. When “Turn MAC Filtering ON and DENY
computers listed to access the network” is selected,
any computer with a MAC address listed in the MAC
Address List is refused access to the network.
This parameter allows you to manually add a MAC
filtering rule. Click the Add button to add the new
MAC filtering rule to the MAC Filtering Rules list at
the bottom of this screen.
Page 29 / 100
29
D-Link DAP-1522 User Manual
Section 3 - Configuration
Transmit Power:
Beacon Period:
DTIM Interval:
RTS Threshold:
Fragmentation
Threshold:
WMM Enable:
Short GI:
IGMP Snooping:
Sets the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
(Delivery Traffic Indication Message) 1 is the default
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
This value should remain at its default setting of
2346. If inconsistent data flow is a problem, only a
minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default setting.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it is less reliable and may
create higher data loss.
This enables IGMP snooping for the wireless connection. We recommend enabling this if you often use multicast services
such as video conferencing and streaming audio/video.
Advanced Wireless
Page 30 / 100
30
D-Link DAP-1522 User Manual
Section 3 - Configuration
WLAN Partition
Use the drop-down menu to either Allow or Deny
internal station connection.
Use the drop-down menu to either Allow or Deny
Ethernet to Wireless LAN access.
Internal
Station
Connection:
Ethernet
to WLAN
Access:
WLAN Partition allows you to segment your Wireless network by managing access to both the internal station and
Ethernet access to your WLAN.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top