6

D-Link DAP-1522 User Manual

Section 1 - Product Overview

• Faster Wireless Networking -

The DAP-1522 provides up to 300Mbps* wireless connection with other 802.11n

wireless clients. This capability allows users to participate in real-time activities online, such as video streaming,

online gaming, and real-time audio. The performance of this 802.11n wireless access point gives you the freedom

of wireless networking at speeds 650% faster than 802.11g.

• Compatible with 802.11a, 802.11b, and 802.11g Devices -

The DAP-1522 is still fully compatible with the

IEEE 802.11a/b/g standard, so it can connect with existing 802.11a/b/g PCI, USB, and Cardbus adapters.

• Advanced Firewall Features -

The Web-based user interface displays advanced network management features

including Content Filtering, which allows easily applied content filtering based on MAC Address.

• WPS PBC-

(Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can

be pressed to add the device to an existing network or to create a new network. A virtual button can be used

on the utility while a physical button is placed on the side of the device.

This easy setup method allows you to form a secured wireless link between the DAP-1522 and another WPS

enabled device. A PC is no longer needed to log into the Web-based interface.

• WPS PIN -

(Wi-Fi Protected Setup Personal Identification Number ) A PIN is a unique number that can be used

to add the access point to an existing network or to create a new network. The default PIN may be printed on

the bottom of the access point. For extra security, a new PIN can be generated. You can restore the default

PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN.

• User-friendly Setup Wizard -

Through its easy-to-use Web-based user interface, the DAP-1522 lets you

control what information is accessible to those on the wireless network, whether from the Internet or from your

company’s server. Configure your access point to your specific settings within minutes.

Features

7

D-Link DAP-1522 User Manual

Section 1 - Product Overview

Hardware Overview

Connections

AP-Auto-Bridge Switch

Three-way switch used to select

AP,

Auto, or Bridge mode.

Reset

Pressing the Reset button restores the access

point to its original factory default settings.

Power Receptor

Receptor for the supplied power

adapter.

LAN Ports (1-4)

Connect Ethernet devices such as computers,

switches, game consoles, setup boxes and hubs.

8

D-Link DAP-1522 User Manual

Section 1 - Product Overview

Hardware Overview

LEDs

Bridge LED

A blinking light indicates that the

DAP-1522 is in bridge mode

AP LED

A blinking light indicates that the

DAP-1522 is in AP mode.

Power LED

A solid light indicates a proper connection

to the power supply.

LAN LEDs

A solid light indicates a connection to an

Ethernet-enabled device on ports 1-4. This

LED blinks during data transmission.

WPS LED

A solid light indicates a successful

WPS connection. A blinking light

indicates the device is trying to

establish a connection.

9

D-Link DAP-1522 User Manual

Section 2 - Installation

Before you Begin

Installation

This section will walk you through the installation process. Placement of the DAP-1522 is very important. Do not place

the DAP-1522 in an enclosed area such as a closet, cabinet, or in the attic or garage.

Please configure the Wireless Bridge with the computer that was last connected directly to your modem. Also, you can

only use the Ethernet port on your modem. If you were using the USB connection before using the Wireless Bridge,

then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port

on the Wireless Bridge, and then turn the modem back on. In some cases, you may need to call your ISP to change

connection types (USB to Ethernet).

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as

WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

10

D-Link DAP-1522 User Manual

Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere

within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location

of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary

depending on the types of materials and background RF (radio frequency) noise in your home or business. The key

to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a

minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position

your devices so that the number of walls or ceilings is minimized.

2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect

on range. Try to position access points, wireless access points, and computers so that the signal passes

through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,

water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that

generate RF noise.

5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits

a signal even if the phone is not in use.