Page 36 / 100 Scroll up to view Page 31 - 35
36
D-Link DAP-1522 User Manual
Section 3 - Configuration
Add Traffic Manager Rule
In Traffic Manager Rule enter settings for each user of your network, using adequate IP (Client IP) or MAC address (Client
MAC). Set appropriate Ethernet to Wireless and Wireless to Ethernet speeds for the traffic you want to regulate.
Enter a name for your new rule.
The IP address assigned to the client.
By assigning MAC addresses to the set of traffic manager rules, specific rules can be defined for individual devices.
Represents the available bandwidth for client data to be forwarded from Ethernet to wireless, the suggested range is 800 ~
96000kbits/sec.
Represents the available bandwidth for client data to be forwarded from wireless to Ethernet, the suggested range is 800 ~
96000kbits/sec.
Note:
Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and
Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will
share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be
used is the same as the set value of both speeds.
Name:
Client IP
(optional):
Client MAC
(optional) :
Ethernet to
Wireless:
Wireless to
Ethernet:
Page 37 / 100
37
D-Link DAP-1522 User Manual
Section 3 - Configuration
Enter a name for your new schedule.
Select a day, a range of days, or All Week to
include every day.
Check
All Days
or enter a start and end time for
your schedule.
Select
On
or
Off
from the drop-down menu.
Click
Add
to save your schedule. You must click
Save Settings
at the top for your schedules to
go into effect.
The list of schedules will be listed here. Click the
Edit
icon to make changes or click the
Delete
icon to remove the schedule.
Name:
Days:
Time:
Wireless:
Add:
Schedule Rules
List:
Schedule
Page 38 / 100
38
D-Link DAP-1522 User Manual
Section 3 - Configuration
Password:
Verify
Password:
Enter a new password for the Administrator Login
Name. The administrator can make changes to the
settings.
Enter the same password that you entered in the
previous textbox in order to confirm its accuracy.
Tools
Admin
This page will allow you to change the Administrator password. The administrator password has read/write access.
Page 39 / 100
39
D-Link DAP-1522 User Manual
Section 3 - Configuration
Time Zone:
Daylight
Saving:
Date and
Time:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, tick the
Enable Daylight Saving check box.
Next use the
drop-down menu to select a Daylight Saving Offset
and then enter a start date and an end date for
daylight saving time.
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings. You can also
click the
Copy Your Computer’s Time Settings
button at the bottom of the screen.
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically
adjust the time when needed.
Page 40 / 100
40
D-Link DAP-1522 User Manual
Section 3 - Configuration
Save to Local
Hard Drive:
Load from Local
Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Clear Language
Pack:
Use this option to save the current access point
configuration settings to a file on the hard disk of
the computer you are using. First, click the
Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Use this option to load previously saved access
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the
Load
button to transfer
those settings to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the
Save
button above.
Note:
Restoring the factory default settings
will not reset the Wi-Fi Protected Status to Not
Configured.
Click to reboot the access point.
Click to clear the language pack. This will put the
web UI back to English.
System

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top