Page 66 / 100 Scroll up to view Page 61 - 65
66
D-Link DAP-1522 User Manual
Section 3 - Configuration
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the
Enable Daylight Saving
check box. Next, use the
drop-down menu to select a Daylight Saving Offset
and then enter a start date and an end date for
daylight saving time.
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings. You can also
click the
Copy Your Computer’s Time Settings
button at the bottom of the screen.
Time Zone:
Daylight
Saving:
Date and
Time:
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically
adjust the time when needed.
Page 67 / 100
67
D-Link DAP-1522 User Manual
Section 3 - Configuration
Save To
Local Hard
Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Clear
Language
Pack:
Use this option to save the current access point
configuration settings to a file on the hard disk of
the computer you are using. First, click the
Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Use this option to load previously saved access
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the
Load
button to transfer
those settings to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the
Save
button above.
Click to reboot the bridge.
Click to clear the language pack. This will put the web UI back to English.
System
Page 68 / 100
68
D-Link DAP-1522 User Manual
Section 3 - Configuration
Browse:
Upload:
After you have downloaded the new firmware, click
Browse
to locate the firmware update on your
hard drive. Click
Upload
to complete the firmware
upgrade.
Once you have a firmware update on your computer,
use this option to browse for the file and then upload
the information into the bridge.
Firmware
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard
drive of the computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the D-Link
support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive
from the D-Link support site.
After you have downloaded the new language
pack, click
Browse
to locate the language pack
file on your hard drive. Click
Upload
to complete
the language pack upgrade.
Language Pack
You can change the language of the web UI by
uploading available language packs.
Browse:
Page 69 / 100
69
D-Link DAP-1522 User Manual
Section 3 - Configuration
If you load a language pack and would like to go back to English, click
Maintenance
>
System
and click on
Clear
next
to
Clear Language Pack
.
Page 70 / 100
70
D-Link DAP-1522 User Manual
Section 3 - Configuration
Displays the access point’s time and firmware
version.
Displays the MAC address and the private (local)
IP settings for the access point.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
General:
LAN:
Wireless LAN:
Status
Device Info
This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top