36

D-Link DAP-1360 User Manual

Section 3 - Configuration

Choose which Security Mode you want to use and

click

Next

to continue.

If you select

WEP

, choose the key type (ASCII or

HEX), the key size (64 or 128-bit), and enter the

wireless security password. Click

Next

to complete

the Setup Wizard.

If you select

WPA

or

WPA2

, enter the wireless

security password. Click

Next

to complete the Setup

Wizard.

37

D-Link DAP-1360 User Manual

Section 3 - Configuration

The Wireless Setup Wizard is complete. Click

Finish

to reboot the device.

38

D-Link DAP-1360 User Manual

Section 3 - Configuration

This Wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions

on how to set up your wireless network and how to make it secure.

Select

PIN

to use your

PIN

number from your

wireless device to connect to your network.

For

PBC

configuration, skip to the next page.

Click

Connect

to continue.

Start

WPS

on the wireless device you are adding to

you wireless network to complete the setup.

Add Wireless Device With WPS

39

D-Link DAP-1360 User Manual

Section 3 - Configuration

Press down the

Push Button

on the wireless device

that you are adding to your network to complete the

setup.

Select

PBC

to use the Push Button Configuration in

order to connect to your network.

Click

Connect

to continue.

40

D-Link DAP-1360 User Manual

Section 3 - Configuration

Manual Configuration

Wireless Settings

You may manually configure your DAP-1360 instead of running the setup wizard.

• Access Point mode - page 41

• Repeater mode - page 43

• Wireless Client mode - page 44

• Bridge mode - page 45

• Bridge with AP mode - page 46

• WISP Client Router mode - page 47

• WISP Repeater mode - page 47