Page 56 / 98
Scroll up to view Page 51 - 55
56
D-Link DAP-1360 User Manual
Section 3 - Configuration
User Limit
Check the
Enable User Limit
box to enable
this feature.
Enter the maximum number of clients, between
1 and 32.
Click
Save Settings
to save and activate the
new changes.
Enable User
Limit:
User Limit:
Save
Settings:
Enter the maximum number of wireless clients that can connect at one time to your access point.
Page 57 / 98
57
D-Link DAP-1360 User Manual
Section 3 - Configuration
Port Forwarding (WISP modes only)
Check the box to configure a port forwarding
rule.
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the
<<
button to fill in
the Name field with the application name that
you selected.
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Select
TCP
,
UDP
, or
Both
.
Port Forwarding
Rules:
Name:
IP Address:
Start/End Ports:
Traffic Type:
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows
you to open a single port or a range of ports. Click
Save Settings
and the port forwarding rule will be put into the Port
Forwarding List.
Page 58 / 98
58
D-Link DAP-1360 User Manual
Section 3 - Configuration
Port Filter (WISP modes only)
Check the box to configure a port filter rule.
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the
<<
button to fill in
the Name field with the application name that
you selected.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Select
TCP
,
UDP
, or
Both
.
Port Filter
Rules:
Name:
Start/End Ports:
Traffic Type:
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature is used
to secure or restrict your local network. It will deny the ports that you enter from the local network to the Internet. Click
Save Settings
and the port filter rule will be put into the Port Filter List.
Page 59 / 98
59
D-Link DAP-1360 User Manual
Section 3 - Configuration
DMZ (WISP modes only)
Check this box to enable DMZ.
Enter the IP address of the computer you
would like to open all ports to. You can select a
computer from the Computer Name drop-down
menu and click
<<
to enter the computer name
into the DMZ Host IP Address field.
Enable DMZ:
DMZ Host IP
Address:
This function is available only if the DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows
you to set up a DMZ (Demilitarized Zone) host. If you have a client PC that cannot run Internet applications properly
from behind the DAP-1360, then you can set the client up for unrestricted Internet access. The DMZ allows a computer
to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the computer that
will be the DMZ host. Adding a client to the DMZ may expose your local network to a variety of security risks, so only
use this option as a last resort.
Page 60 / 98
60
D-Link DAP-1360 User Manual
Section 3 - Configuration
Parental Control (WISP modes only)
Select
Turn Website Filtering OFF
or
Turn
Website Filtering ON and DENY computers
access to ONLY these sites
.
Enter a keyword or URL that you want to block
and click
Save Settings
. Any URL that contains
the keyword will be blocked.
Configure Website
Filtering Below:
Website URL
Address:
This function is available only if the DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature
allows you to create a list of websites that you want to deny users access.
19216811.live