Page 26 / 98 Scroll up to view Page 21 - 25
26
D-Link DAP-1360 User Manual
Section 3 - Configuration
This Wizard is designed to assist you in configuring your DAP-1360 as a repeater.
If you want to change the admin account password,
enter a new password and click
Next
. It is strongly
recommended to change your password.
Repeater Mode
Select
Repeater
from the drop-down menu.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the same wireless network.
Page 27 / 98
27
D-Link DAP-1360 User Manual
Section 3 - Configuration
For PBC (Push Button Configuration), skip to the
next page.
Select
PIN
to connect your wireless device with
WPS. You may click
Generate New PIN
to use a
different PIN number. Click
Connect
to start the
WPS scan.
Within 2 minutes, enter the PIN number into the other
device you want to connect to.
Select
Auto
as the configuration method only if your
wireless device supports Wi-Fi Protected Setup
(WPS). For
Manual
setup, skip to the next page.
Click
Next
to continue.
Page 28 / 98
28
D-Link DAP-1360 User Manual
Section 3 - Configuration
Select
PBC
to use the Push Button Configuration to
connect to your network.
Click
Connect
to continue.
Note:
You may also press the WPS button located
on the side of the DAP-1360 instead of running this
wizard.
On the device you want to connect to, start the PBC
process on the device. You will have 2 minutes to
start the PBC process on both devices.
Page 29 / 98
29
D-Link DAP-1360 User Manual
Section 3 - Configuration
Select
Manual
configuration to setup your network
manually.
Click
Next
to continue.
Enter the network name (SSID) of the network you
want to connect to. If you do not know the exact name
or would like to search for the wireless network, click
Site Survey
.
Find your access point from the list, click the radio
button in the right column, and click
Connect
.
Page 30 / 98
30
D-Link DAP-1360 User Manual
Section 3 - Configuration
Choose which Security Mode you want to use and
click
Next
to continue.
If you select
WEP
, choose the key type (ASCII or
HEX), the key size (64 or 128-bit), and enter the
wireless security password. Click
Next
to complete
the Setup Wizard.
If you select
WPA
or
WPA2
, enter the wireless
security password. Click
Next
to complete the Setup
Wizard.

Rate

4.6 / 5 based on 5 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top