Page 21 / 98
Scroll up to view Page 16 - 20
21
D-Link DAP-1360 User Manual
Section 3 - Configuration
Click
Launch Wireless Setup Wizard
to configure
your access point.
To set up your wireless network, click
Add Wireless
Device
With WPS
and skip to page 38.
If you want to enter your settings without running the
wizard, click
Wireless Setup
on the left side and
skip to page 40.
Wireless Setup Wizard
Page 22 / 98
22
D-Link DAP-1360 User Manual
Section 3 - Configuration
This Wizard is designed to assist you in configuring your DAP-1360 as an access point.
Access Point Mode
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the same wireless network.
Select
Access Point
from the drop-down menu.
Page 23 / 98
23
D-Link DAP-1360 User Manual
Section 3 - Configuration
Click
Save
to save your network settings.
In order for your network settings to take effect AP
will reboot automatically.
When the device has finished rebooting the main
screen will display.
Select
Auto
as the configuration method only if your
wireless device supports Wi-Fi Protected Setup
(WPS). For
Manual
setup, skip to the next page.
Click
Next
to continue.
If you want to change the admin account password,
enter a new password and click
Next
. It is strongly
recommended to change your password.
Page 24 / 98
24
D-Link DAP-1360 User Manual
Section 3 - Configuration
Select
Manual
as the configuration method to set
up your network manually.
Click
Next
to continue.
Enter a name for your wireless network (SSID).
Select
Automatically assign a network key
to
have the access point generate a key for you to
enter on your wireless clients. If you want to enter
your own key, select
Manually assign a network
key
.
To use WPA security, check the
use WPA
encryption instead of WEP box
. If left unchecked,
WEP encryption will be used.
Click
Next
to continue.
If you selected
Manually assign a network key
as
the configuration method, enter your network key.
This key must be entered on your wireless clients.
For
WEP
encryption, enter a Network Key exactly 5
or 13 characters long or exactly 10 or 26 characters
using 0-9 and A-F.
Click
Next
to continue.
Page 25 / 98
25
D-Link DAP-1360 User Manual
Section 3 - Configuration
The following screen will show you your network key
to enter on your wireless clients.
Click
Save
to finish the Setup Wizard.
19216811.live