´³

D-Link DAP-1350 User Manual

Section 3 - Configuration

Wireless Settings

Enable Wireless:

Wireless Network

Name:

Wireless Mode:

Enable Auto

Channel Scan:

Wireless Channel:

Transmission Rate:

Channel Width:

Visibility Status:

Wireless Security

Mode:

Select this to turn the Wi-Fi module on and off.

Use the drop-down box to select if you want to

use a schedule. Click

Add New Schedule

to

add or change a schedule.

Enter a wireless network name (SSID) for your

network (up to 32 characters).

Select the appropriate 802.11 mode based

on the wireless clients in your network. The

drop-down menu options are

802.11g Only

,

Mixed 802.11b/g

,

802.11b Only

,

802.11n Only

,

or

Mixed 802.11b/g/n

.

Check this box to have the device automatically

scan for the best available channel.

Select a wireless channel. It is recommended

to use channels 1,6, or 11. This option will

be disabled if the

Auto Channel Scan

box is

checked.

Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.

Select the appropriate channel width between

20MHz

or

Auto 20/40MHz

from the drop-down menu.

Select

Invisible

if you do not want the SSID of your wireless network to be broadcast by the DAP-1350. If Invisible is selected,

the SSID of the DAP-1350 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your

DAP-1350 in order to connect to it.

Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the

Wireless Security

section of this

manual for a detailed explanation of the wireless security options.

´´

D-Link DAP-1350 User Manual

Section 3 - Configuration

Network Settings

Enter the IP address of the router. The default IP

address is 192.168.0.1.

If you change the IP address, once you click

Apply

,

you will need to enter the new IP address in your

browser to get back into the configuration utility.

Enter the Subnet Mask. The default subnet mask is

255.255.255.0.

Enter the Domain name (Optional).

Uncheck the box to transfer the DNS server

information from your ISP to your computers. If

checked, your computers will use the router for a

DNS server.

IP Address:

Subnet Mask:

Local Domain:

Enable DNS Relay:

´µ

D-Link DAP-1350 User Manual

Section 3 - Configuration

Check this box to enable the DHCP server on

your router. Uncheck to disable this function.

Enter the starting and ending IP addresses for

the DHCP server’s IP assignment.

Note:

If you statically (manually) assign IP

addresses to your computers or devices, make

sure the IP addresses are outside of this range

or you may have an IP conflict.

The length of time for the IP address lease.

Enter the Lease time in minutes.

Refer to the next page for the DHCP Reservation

function.

Enable DHCP

Server:

DHCP IP Address

Range:

Lease Time:

Add DHCP

Reservation:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DAP-1350 has a built-in DHCP server. The DHCP Server will

automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be

DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on,

they will automatically load the proper TCP/IP settings provided by the DAP-1350. The DHCP Server will automatically

allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and

ending address of the IP address pool.

´¶

D-Link DAP-1350 User Manual

Section 3 - Configuration

DHCP Reservation

If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.

The router will assign the IP address only to that computer or device.

Note:

This IP address must be within the DHCP IP Address Range.

Check this box to enable the reservation.

Enter the computer name or select from the drop-down

menu and click

<<

.

Enter the IP address you want to assign to the computer

or device. This IP Address must be within the DHCP

IP Address Range.

Enter the MAC address of the computer or device.

If you want to assign an IP address to the computer

you are currently on, click this button to populate the

fields.

Click

Save

to save your entry. You must click

Save

Settings

at the top to activate your reservations.

In this section you can see what LAN devices are

currently leasing IP addresses.

Enable:

Computer Name:

IP Address:

MAC Address:

Copy Your PC’s

MAC Address:

Save:

Number of

Dynamic DHCP

Clients:

µ0

D-Link DAP-1350 User Manual

Section 3 - Configuration

USB Settings

Use this section to configure your USB port. Share Port will be selected.

Note:

If using the SharePort option, users will need to install the SharePort Utility into the computers to share the USB

device through the router. Please see the SharePort Manual on the CD for more information.

Note:

The USB port may be used for 3G adapters. Currently only D-Link’s 3G cards will be supported.