Page 96 / 139
Scroll up to view Page 91 - 95
¶³
D-Link DAP-1350 User Manual
Section 3 - Configuration
Use this option to save the current router
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save
button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save file of
configuration settings. Then, click the
Restore
Configuration from File
button to transfer
those settings to the router.
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the
Save
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings
Page 97 / 139
¶´
D-Link DAP-1350 User Manual
Section 3 - Configuration
Click on
Check Online Now for Latest Firmware
Version
to find out if there is an updated firmware;
if so, download the new firmware to your hard
drive.
After you have downloaded the new firmware,
click
Browse
to locate the firmware update on
your hard drive.
Click
Upload
to complete the
firmware upgrade.
Check
Automatically Check Online for Latest
Firmware Version
to have the router check
automatically to see if there is a new firmware
upgrade.
Check
Email Notification of Newer Firmware
Version
to have the router send an e-mail when
there is a new firmware available.
Firmware
Upgrade:
Browse:
Notifications
Options:
Firmware Update
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the D-Link support
from the D-Link support site.
Page 98 / 139
¶µ
D-Link DAP-1350 User Manual
Section 3 - Configuration
Enter a name for your new schedule.
Select a day, a range of days, or All Week to
include every day.
Check
All Day - 24hrs
or enter a start and end
time for your schedule.
Click
Save
to save your schedule. You must click
Save Settings at the top for your schedules to go
into effect.
The list of schedules will be listed here. Click the
Edit
icon to make changes or click the
Delete
icon to remove the schedule.
Name:
Days:
Time:
Save:
Schedule Rules
List:
Schedules
Page 99 / 139
¶¶
D-Link DAP-1350 User Manual
Section 3 - Configuration
This page displays the current information for the DAP-1350. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a
Release
button and a
Renew
button will be displayed. Use
Release
to disconnect from your ISP and use
Renew
to connect to your ISP.
If your Internet connection is set up for PPPoE, a
Connect
button and a
Disconnect
button will be displayed. Use
Disconnect
to drop
the PPPoE connection and use
Connect
to establish the PPPoE connection.
Displays the router’s time and firmware version.
Displays the MAC address and the public IP settings for the
router.
Displays the MAC address and the private (local) IP settings
for the router.
Displays the wireless MAC address and your wireless settings
such as SSID and Channel.
Displays computers and devices that are connected to the router
via Ethernet and that are receiving an IP address assigned by
the router (DHCP).
General:
WAN:
LAN:
Wireless LAN:
LAN Computers:
Device Information
Page 100 / 139
100
D-Link DAP-1350 User Manual
Section 3 - Configuration
The wireless client table displays a list of current connected wireless clients. This table also displays the connection
rate and MAC address of the connected wireless clients.
Wireless
19216811.live