Page 101 / 139 Scroll up to view Page 96 - 100
101
D-Link DAP-1350 User Manual
Section 3 - Configuration
Logs
Log Options:
First Page:
Last Page:
Previous:
Next:
Clear:
Log Settings:
Refresh:
Save Log:
You can select the types of messages that you
want to display from the log:
System Activity
,
Debug Information
,
Attacks
,
Dropped
Packets
, and
Notice
. Select and click
Apply
Log Settings Now
.
This button directs you to the first page of the
log.
This button directs you to the last page of the
log.
This button directs you to the previous page of
the log.
This button directs you to the next page of the
log.
This button clears all current log content.
This button opens a new menu where you can
configure the log settings.
This button refreshes the log.
This option will save the router log to a file on
your computer.
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows
you to view the router logs. You can define what types of events you want to view and the level of the events to view.
This router also has external Syslog Server support so you can send the log files to a computer on your network that
is running a Syslog utility.
Page 102 / 139
10±
D-Link DAP-1350 User Manual
Section 3 - Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DAP-1350
on the Internet, wireless, and the LAN ports. The traffic counter will reset if the device is rebooted.
Page 103 / 139
103
D-Link DAP-1350 User Manual
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a
conversation between a program or application on a LAN-side computer and a program or application on a WAN-side
computer.
Local:
NAT:
Internet:
Protocol:
State:
The IP address and, where appropriate, port
number of the local application.
The port number of the LAN-side application as
viewed by the WAN-side application.
The IP address and, where appropriate, port
number of the application on the Internet.
The communications protocol used for the
conversation.
State for sessions that use the TCP protocol:
NO:
None -- This entry is used as a placeholder
for a future connection that may occur.
SS:
SYN Sent -- One of the systems is attempting
to start a connection.
EST:
Established -- the connection is passing data.
FW:
FIN Wait -- The client system has requested that the connection be stopped.
CW:
Close Wait -- The server system has requested that the connection be stopped.
TW:
Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
LA:
Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
CL:
Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets
still pending.
Page 104 / 139
10²
D-Link DAP-1350 User Manual
Section 3 - Configuration
Dir:
Priority:
Time Out:
The direction of initiation of the conversation:
Out
- Initiated from LAN to WAN.
In
- Initiated from WAN to LAN.
The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher
priority.
The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends
on the type and state of the connection.
300 seconds
- UDP connections.
240 seconds
- Reset or closed TCP connections. The connection does not close instantly so that lingering packets
can pass or the connection can be re-established.
7800 seconds
- Established or closing TCP connections.
Page 105 / 139
105
D-Link DAP-1350 User Manual
Section 3 - Configuration
Help

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top