Page 56 / 139
Scroll up to view Page 51 - 55
5³
D-Link DAP-1350 User Manual
Section 3 - Configuration
Time Zone:
Daylight Saving:
Enable NTP Server:
NTP Server Used:
Date and Time:
Select the Time Zone from the drop-down
menu.
To select Daylight Saving time manually, click
the
Enable Daylight Saving
check box. Next
use the drop-down menu to select a Daylight
Saving Offset and then enter a start date and
an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP
server. This will only connect to a server on the
Internet, not a local server.
Enter the NTP server or select one from the
drop-down menu.
To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second and then click
Save
Settings
. You can also click the
Copy Your
Computer’s Time Settings
button at the bottom
of the screen.
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically
adjust the time when needed.
Page 57 / 139
5´
D-Link DAP-1350 User Manual
Section 3 - Configuration
General:
LAN:
Wireless LAN:
Displays the access point’s time and firmware
version.
Displays the MAC address and the private
(local) IP settings for the access point.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
Device Info
This page displays the current information for the DAP-1350. It will display the LAN and wireless LAN information.
Page 58 / 139
5µ
D-Link DAP-1350 User Manual
Section 3 - Configuration
Log Options:
First Page:
Last Page:
Previous:
Next:
Clear:
Log Settings:
Refresh:
You can select the types of messages that you
want to display from the log:
System Activity
,
Debug Information
,
Attacks
,
Dropped Packets
,
and
Notice
. Select and click
Apply Log Settings
Now
.
This button directs you to the first page of the log.
This button directs you to the last page of the log.
This button directs you to the previous page of the
log.
This button directs you to the next page of the
log.
This button clears all current log content.
This button opens a new menu where you can
configure the log settings.
This button refreshes the log.
Logs
The DAP-1350 keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are
automatically cleared. You can save the log files under Log Settings.
Page 59 / 139
5¶
D-Link DAP-1350 User Manual
Section 3 - Configuration
Statistics
The DAP-1350 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through
the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted.
Page 60 / 139
³0
D-Link DAP-1350 User Manual
Section 3 - Configuration
Help
19216811.live