Page 61 / 139
Scroll up to view Page 56 - 60
³1
D-Link DAP-1350 User Manual
Section 3 - Configuration
Router Mode
If you wish to change the default settings or optimize
the performance of the DAP-1350, you may use the
web-based configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter
dlinkap
or
192.168.0.50
in the address field.
Type
admin
and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please
refer to the
Troubleshooting
section for assistance.
Change the mode selector to
RT
on the device. Connect an Ethernet cable from the Ethernet port on the DAP-1350
to your broadband modem. You will need to connect wirelessly to the DAP-1350 to configure it.
Page 62 / 139
³±
D-Link DAP-1350 User Manual
Section 3 - Configuration
Click
Launch Internet Connection Setup Wizard
to begin.
If you want to enter your settings without running the wizard,
click
Manual Internet Configuration Setup
and skip to page
65.
Setup Wizard
Click
Next
to continue.
Create a new password and then click
Next
to continue.
Page 63 / 139
³3
D-Link DAP-1350 User Manual
Section 3 - Configuration
Select your time zone from the drop-down menu and
then click
Next
to continue.
Select the type of Internet connection you use and
then click
Next
to continue.
Page 64 / 139
³²
D-Link DAP-1350 User Manual
Section 3 - Configuration
If you selected Dynamic, you may need to enter
the MAC address of the computer that was last
connected directly to your modem. If you are currently
using that computer, click
Clone Your PC’s MAC
Address
and then click
Next
to continue.
The Host Name is optional but may be required by
some ISPs. The default host name is the device name
of the Router and may be changed.
Click
Connect
to save your settings. Once the router
is finished rebooting, click
Continue
. Please allow
1-2 minutes to connect.
Close your browser window and reopen it to test your
Internet connection. It may take a few tries to initially
connect to the Internet.
Page 65 / 139
³5
D-Link DAP-1350 User Manual
Section 3 - Configuration
Internet Setup
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select
your Internet type and enter the correct configuration parameters.
Select your Internet connection type using the “
My Internet Connection is”
drop-down menu.
Click the
Save Settings
button when you have configured the connection.
19216811.live