Page 116 / 134
Scroll up to view Page 111 - 115
DG-BG4100N User
Manual
116
3.7.3
Log
Choose
Admin > Log
, and the page shown in the following figure appears. In this page, you
can enable or disable system log function and view the system log.
Field
Description
Error
Enabling this option will display the errors such as wrong
configuration or password is wrong.
Notice
Enabling this will capture the events such as Web
management login , Link is down etc.
Page 117 / 134
DG-BG4100N User
Manual
117
3.7.4
Password
Choose
Admin > Password
, and the page shown in the following figure appears. By default,
the user name and password are admin and admin respectively. The common user name
and password are user and user respectively.
The following table describes the parameters of this page:
Field
Description
User Name
Choose the user name for accessing the router.
You can choose admin or user.
Privilege
Choose the privilege for the account.
Old Password
Enter the old password.
New Password
Enter the new password.
Confirm Password
Enter the new password again.
Page 118 / 134
DG-BG4100N User
Manual
118
3.7.5
Time
Choose
Admin > Time
, and the page shown in the following figure appears. You can
configure the system time manually or get the system time from the time server.
The following table describes the parameters of this page:
Field
Description
System Time
Set the system time manually.
Day Light
Check this option if your location observes daylight saving
time. Daylight saving time begins in the southern
hemisphere between September–November and ends
Page 119 / 134
DG-BG4100N User
Manual
119
between March–April. Standard time begins in the
southern hemisphere between March–April and ends
between September–November. Many countries in the
southern hemisphere may observe DST.
NTP Configuration
State
Select enable or disable NTP function. You need to
enable NTP if you want to configure the parameters of
NTP.
Primary Server
Set the primary NTP server manually.
Secondary Server
Set the secondary NTP server manually.
Interval
Time when the NTP client will synchronise with NTP
server.
Time Zone
Choose the time zone in which area you are from the
drop down list.
3.8
Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed contains Ping,
Traceroute, OAM Loopback, ADSL Statistics and Diag-Test.
3.8.1
Ping
Choose
Diagnostic > Ping
. The Ping page that is displayed contains Ping and Ping6.
3.8.1.1 Ping
Click
Ping
in the left pane, and the page shown in the following figure appears.
Page 120 / 134
DG-BG4100N User
Manual
120
The following table describes the parameter and button of this page:
Field
Description
Host
Enter the valid IP address or domain name.
Ping
Click it to start to Ping.
3.8.1.2 Ping6
Click
Ping6
in the left pane, and the page shown in the following figure appears
The following table describes the parameter and button of this page:
Field
Description
Target Address
Enter an IP address for Ping6 diagnostic.
Interface name
Enter an interface through which the Ping6 diagnostic
is performed.
19216811.live