1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. WRVS4400Nv2
    5. /
  5. 30
Page 146 / 180 Scroll up to view Page 141 - 145
WRVS4400N User Guide
140
Overview
Configuring a Gateway-to-Gateway
IPSec Tunnel
Overview
This appendix explains how to configure an IPSec VPN tunnel between two VPN Routers by
example. Two PCs are used to test the liveliness of the tunnel. You can think of the VPN Router1,
Internet, VPN Router2 as a big virtual router that connects PC1 on LAN1 and PC2 on LAN2.
Diagram of Gateway-to-Gateway VPN Tunnel
Before You Begin
The following is a list of equipment you need:
•
Two Windows desktop PCs (each PC will be connected to a VPN Router)
•
Two VPN Routers that are both connected to the Internet
Configuring the VPN Settings for the VPN Routers
Configuring VPN Router 1
Follow these instructions for the first VPN Router, designated VPN Router 1. The other VPN
Router is designated VPN Router 2.
1.
Launch the web browser for a networked PC, designated PC 1.
2.
Enter the VPN Router’s local IP address in the
Address
field (default is
192.168.1.1
). Then
press
Enter
.
NOTE:
Each computer must have a network adapter
installed.
Downloaded from
www.Manualslib.com
manuals search engine
Page 147 / 180
WRVS4400N User Guide
141
Configuring the VPN Settings for the VPN Routers
3.
A password request page will appear. (Non-Windows XP users will see a similar screen.)
Complete the
User Name
and
Password
fields (
admin
is the default user name and
password). Then click the
OK
button.
4.
The main window appears.
Downloaded from
www.Manualslib.com
manuals search engine
Page 148 / 180
WRVS4400N User Guide
142
Configuring the VPN Settings for the VPN Routers
5.
Click the
VPN
tab.
6.
Click the
IPSec VPN
tab.
7.
For the VPN Tunnel setting, select
Enabled
.
8.
Enter a name in the
Tunnel Name
field.
9.
For the Local Secure Group, select
Subnet
. Enter VPN Router 1’s local network settings in
the
IP Address
and
Mask
fields.
10. For the Remote Secure Group, select
Subnet
. Enter VPN Router 2’s local network settings in
the
IP Address
and
Mask
fields. Note that the subnet of Router 2 must be different than the
subnet of Router 1.
11. For the Remote Secure Gateway, select
IP Addr
. Enter VPN Router 2’s WAN IP address in the
IP Address
field.
12. Click the
Save Settings
button.
Configuring VPN Router 2
Follow similar instructions for VPN Router 2.
1.
Launch the web browser for a networked PC, designated PC 2.
2.
Enter the VPN Router’s local IP address in the
Address
field (default is
192.168.1.1
). Then
press
Enter
.
3.
A password request page will appear. (Non-Windows XP users will see a similar screen.)
Complete the
User Name
and
Password
fields (
admin
is the default user name and
password).
Then click the
OK
button.
4.
If the LAN IP address is still the default one, change it to 172.168.1.1 and save the setting.
5.
Click the
VPN
tab.
6.
Click the
IPSec
VPN
tab.
7.
For the VPN Tunnel setting, select
Enabled
.
8.
Enter a name in the
Tunnel Name
field.
9.
For the Local Secure Group, select
Subnet
. Enter VPN Router 2’s local network settings in
the
IP Address
and
Mask
fields.
10. For the Remote Secure Group, select
Subnet
. Enter VPN Router 1’s local network settings in
the
IP Address
and
Mask
fields.
11. For the Remote Secure Gateway, select IP Addr. Enter VPN Router 1’s WAN IP address in the
IP Address
field.
12. Click the
Save Settings
button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 149 / 180
WRVS4400N User Guide
143
Configuring the Key Management Settings
Configuring the Key Management Settings
Configuring VPN Router 1
Following these instructions for VPN Router 1.
1.
On the
IPSec VPN
screen, select
3DES
from the
Encryption
drop-down menu.
2.
Select
MD5
from the
Authentication
drop-down menu.
3.
Keep the default Key Exchange Method,
Auto(IKE)
.
4.
Select
Pre-Shared Key
, and enter a string for this key., e.g. 13572468.
5.
For the PFS setting, select
Enabled
.
6.
If you need more detailed settings, click the
Advanced Settings
button. Otherwise, click
the
Save Settings
button and proceed to the next section, “Configuring VPN Router 2.”
7.
On the
Advanced VPN Tunnel Setup
screen, keep the default Operation Mode,
Main
.
Advanced IPsec VPN Tunnel Settings
8.
For Phase 1, select 3
DES
from the
Encryption
drop-down menu.
9.
Select
MD5
from the
Authentication
drop-down menu.
10. Select
1024-bit
from the
Group
drop-down menu.
11. Enter
3600
in the
Key Life Time
field.
12. For Phase 2, the Encryption, Authentication, and PFS settings were set on the
VPN
screen.
Select
1024-bit
from the
Group
drop-down menu.
13. Keep the default Key Life Time value,
28800
.
14. Click the
Save Settings
button on the
Advanced VPN Tunnel Setup
screen.
Downloaded from
www.Manualslib.com
manuals search engine
Page 150 / 180
WRVS4400N User Guide
144
Configuring PC 1 and PC 2
15. Click the
Save Settings
button on the
IPSec VPN
screen.
Configuring VPN Router 2
For VPN Router 2, follow the same instructions as you did for configuring VPN Router 1.
Configuring PC 1 and PC 2
1.
Set PC 1 and PC 2 to be DHCP clients (refer to Windows Help for more information).
2.
Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more information).
If the computers can ping each other, then you know the VPN tunnel is configured correctly.
You can select different algorithms for the encryption, authentication, and other key
management settings for VPN Routers 1 and 2.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top