Page 121 / 180
Scroll up to view Page 116 - 120
WRVS4400N User Guide
115
Running the VPN Router Software Wizard
VPN Setup Wizard
Building Your VPN Connection Remotely
This procedure continues from Step 5. Use this procedure to build your VPN connection from a
remote PC.
1.
Choose
Build VPN connection from Internet remotely
. Click
Next
to continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 122 / 180
WRVS4400N User Guide
116
Running the VPN Router Software Wizard
VPN Setup Wizard
2.
Enter the required data in the Configure VPN Tunnel screen and then click
Next
to continue.
•
Router 1 User Name
: Enter the user name of the Router 1.
•
Router 1 Password
: Enter the password of the Router 1.
•
Router 2 User Name
: Enter the user name of the Router 2.
•
Router 2 Password
: Enter the password of the Router 2.
•
Tunnel Name
: Enter a name for this tunnel.
•
Pre-shared Key
: IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both
character and hexadecimal values are acceptable in this field; e.g.,“My_@123” or
“0x4d795f40313233”. Note that both sides must use the same
Pre-shared Key.
•
Router 1 WAN IP address
: Enter the WAN IP address of the router 1.
•
Router 1 IP by DNS Resolved
: Enter the DDNS Domain Name of router 1 if it does not have
a static IP address for its internet connection.
•
Router 2 WAN IP address
: Enter the WAN IP address of the router 2.
•
Router 2 IP by DNS Resolved
:Enter the DDNS Domain Name of router 2 if it does not have
a static IP address for its internet connection.
Downloaded from
www.Manualslib.com
manuals search engine
Page 123 / 180
WRVS4400N User Guide
117
Running the VPN Router Software Wizard
VPN Setup Wizard
3.
The router configuration is checked.
4.
The Summary screen appears. Use the
Click
box to view the VPNC Summary screen.
Downloaded from
www.Manualslib.com
manuals search engine
Page 124 / 180
WRVS4400N User Guide
118
Running the VPN Router Software Wizard
VPN Setup Wizard
5.
The VPNC Summary screen appears showing the settings that were made to industry
standards. Click
Close
when you are ready to continue.
6.
In the Summary screen, if all your entries appear correct, click
Go
. Otherwise click
Back
to
go back and make any corrections.
Downloaded from
www.Manualslib.com
manuals search engine
Page 125 / 180
WRVS4400N User Guide
119
Running the VPN Router Software Wizard
VPN Setup Wizard
7.
Click
Testing
to make sure the connection is successfully established.
8.
When testing is done, click
Exit
to end the Wizard.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live