19216811.liveChapter 3
Operation of Front Panel Indicators
24
OL-29161-01
Normal Operations (AC Power Applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
Normal Operations
1
POWER
On
2
DS
On
3
US
On
4
ONLINE
On
5
ETHERNET 1-4
On - When a single device is connected to the Ethernet port
and no data is being sent to or from the residential gateway
Blinks - When only one Ethernet device is connected and
data is being transferred between the consumer premise
equipment (CPE) and the wireless home gateway
Off - When no devices are connected to the Ethernet ports
6
USB
On - When a single device is connected to the USB port and
no data is being sent to or from the modem
Blinks - When only one USB device is connected and data is
being transferred between the consumer premise equipment
(CPE) and the wireless home gateway
Off - When no devices are connected to the USB ports
7
WIRELESS
ON/OFF
On - When the wireless access point is enabled and
operational
Blinks - When data is being transferred between the CPE
and the wireless home gateway
Off - When the wireless access point is disabled by the user
8
WIRELESS
SETUP
Off - When wireless setup is not active
Blinks - When wireless setup is active to add new wireless
clients on the wireless network
9
TEL 1
On - When telephony service is enabled
Blinks - When line 1 is in use
10
TEL 2
On - When telephony service is enabled
Blinks - When line 2 is in use