Page 21 / 54 Scroll up to view Page 16 - 20
What's In the Carton?
OL-30773-01
3
What's In the Carton?
When you receive your residential gateway, you should check the equipment and
accessories to verify that each item is in the carton and that each item is undamaged.
The carton contains the following items:
One EPC3940 (left) or EPC3940L
(right) EuroDOCSIS Wireless
Residential Gateway with Voice
One AC power adapter with power
cord (Image may vary from actual
product. Item varies based on the
region where the item is used.)
One Ethernet cable (May not be
provided with all products.)
One USB cable (Image may vary from
product. May not be provided with all
products.)
If any of these items are missing or damaged, please contact your service provider
for assistance.
Notes:
You need an optional cable signal splitter and additional standard RF coaxial
cables if you want to connect a VCR, a Digital Home Communications Terminal
(DHCT) or a set-top converter, or a TV to the same cable connection as your
residential gateway.
If your product supports telephone service, cables and other equipment needed
for telephone service must be purchased separately. Contact your service
provider to inquire about the equipment and cables you need for telephone
service.
Page 22 / 54
Chapter 1
Introducing the EuroDOCSIS Wireless Residential Gateway with Voice
4
OL-30773-01
Front Panel Description
The front panel of your residential gateway provides LED status indicators that
indicate how well and at what state your residential gateway is operating. See
Operation of Front Panel Indicators
(on page 21), for more information on front
panel LED status indicator functions.
Gateway Model EPC3940 (lef t) and Gateway Model EPC3940L (right)
1
POWER
—ON, power is applied to the residential gateway.
2
DS
—ON, the residential gateway is receiving data from the cable network.
3
US
—ON, the residential gateway is sending data to the cable network.
4
ONLINE
—ON, the residential gateway is registered on the network and fully
operational.
5
1-4
—ON, the Ethernet connection is operational. BLINKING indicates that data
is being transferred over the Ethernet connection. OFF indicates that the Ethernet
connection is not connected or has been disabled by the user.
6
WIRELESS ON/OFF Button
(model EPC3940L only)—Press this button to
activate the Wireless feature. This feature allows users to transfer data over the
wireless connection.
Page 23 / 54
Front Panel Description
OL-30773-01
5
7
2.4G
—ON, the wireless access point is operational. Blinking indicates that data is
being transferred over the wireless connection. OFF indicates that the wireless
access point is not enabled.
8
5G
—ON, the wireless access point is operational. Blinking indicates that data is
being transferred over the wireless connection. OFF indicates that the wireless
access point is not enabled.
9
WPS
(model EPC3940 only)—OFF (normal condition), indicates that the wireless
setup is not active. BLINKING indicates the user has activated wireless setup to
add new Wireless Protected Setup (WPS) clients on the wireless network.
10
WPS Button
(model EPC3940L only)—Press this button to activate the Wireless
Setup feature for the model EPC3940L. This feature allows users to add new
Wireless Protected Setup (WPS) compliant wireless clients to the home network.
Note:
The WPS button is on the top panel of model EPC3940. For more
information, see
Top Panel Description
(on page 6).
11
TEL1
—ON indicates telephony service is enabled. Blinks when line 1 is in use.
OFF indicates that phone service for TEL 1 is not enabled.
12
TEL2
—ON indicates telephony service is enabled. Blinks when line 2 is in use.
OFF indicates that phone service for TEL 2 is not enabled.
Page 24 / 54
Chapter 1
Introducing the EuroDOCSIS Wireless Residential Gateway with Voice
6
OL-30773-01
Top Panel Description
The WPS button on the top panel of the EPC3940 residential gateway shows the
status of the Wireless Protected Setup (WPS) feature. The EPC3940L residential
gateway has a similar button on the front panel. For more information, see
Front
Panel Description
(on page 4).
Gateway Model EPC3940
1
WIRELESS SETUP Button
—Press this button to activate the Wireless Setup
feature. This feature allows users to add new Wireless Protected Setup (WPS)
compliant wireless clients to the home network.
Page 25 / 54
Back Panel Description
OL-30773-01
7
Back Panel Description
The following illustration identifies the back panel components on the EPC3940 and
EPC3940L residential gateways. Descriptions for each component follow the
illustration.
Gateway Model EPC3940 (lef t) and Gateway Model EPC3940L (right)
Important:
Do not connect your PC to both the Ethernet and USB ports at the same
time. Your residential gateway will not function properly if both the Ethernet and
USB ports are connected to your PC at the same time.
1
POWER and ON/OFF Switch
—Connects the residential gateway to the AC
power adapter and allows you to turn off of the residential gateway without
removing the power cord. Turning the residential gateway off using this switch
ensures that the unit is consuming no energy
2
TELEPHONE 1 and 2
—RJ-11 telephone ports connect to home telephone wiring
to conventional telephones or fax machines
3
USB (Optional for some models)
—Connects to selected devices. For models that
support USB, the default is one USB port

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top