IMPORTANT SAFETY INSTRUCTIONS

OL-30773-01

vii

IMPORTANT SAFETY INSTRUCTIONS

1)

Read these instructions.

2)

Keep these instructions.

3)

Heed all warnings.

4)

Follow all instructions.

5)

Do not use this apparatus near water.

6)

Clean only with dry cloth.

7)

Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8)

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9)

Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding-type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11)

Only use attachments/accessories specified by the manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13)

Unplug this apparatus during lightning storms or when unused for long periods

of time.

14)

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as a power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

Power Source Warning

A label on this product indicates the correct power source for this product. Operate this product only

from an electrical outlet with the voltage and frequency indicated on the product label. If you are

uncertain of the type of power supply to your home or business, consult your service provider or your

local power company.

The AC inlet on the unit must remain accessible and operable at all times.

Ground the Product

WARNING: Avoid electric shock and fire hazard! If this product connects to coaxial

cable wiring, be sure the cable system is grounded (earthed). Grounding provides

some protection against voltage surges and built-up static charges.

IMPORTANT SAFETY INSTRUCTIONS

viii

OL-30773-01

Protect the Product from Lightning

In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs.

Verify the Power Source from the On/Off Power Light

When the on/off power light is not illuminated, the apparatus may still be connected to the power

source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged

into an AC power source.

Eliminate AC Power/Mains Overloads

WARNING: Avoid electric shock and fire hazard! Do not overload AC power/mains,

outlets, extension cords, or integral convenience receptacles. For products that require

battery power or other power sources to operate them, refer to the operating

instructions for those products.

Provide Ventilation and Select a Location



Remove all packaging material before applying power to the product.



Do not place this apparatus on a bed, sofa, rug, or similar surface.



Do not place this apparatus on an unstable surface.



Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation

provides proper ventilation.



Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or

other objects on top of this product.



Do not block ventilation openings.

Operating Environment

This product is designed for operation indoors with a temperature range from 32° to 104° F (0° to 40°C).

Each product should have adequate spacing on all sides so that the cooling air vents on the chassis are

not blocked.

Protect from Exposure to Moisture and Foreign Objects

WARNING: Avoid electric shock and fire hazard! Do not expose this product to

dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as

vases, should not be placed on this apparatus.

WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning.

Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning

device (dust remover) to clean this product.

WARNING: Avoid electric shock and fire hazard! Never push objects through the

openings in this product. Foreign objects can cause electrical shorts that can result in

electric shock or fire.

IMPORTANT SAFETY INSTRUCTIONS

OL-30773-01

ix

Service Warnings

WARNING: Avoid electric shock! Do not open the cover of this product. Opening or

removing the cover may expose you to dangerous voltages. If you open the cover, your

warranty will be void. This product contains no user-serviceable parts.

Check Product Safety

Upon completion of any service or repairs to this product, the service technician must perform safety

checks to determine that this product is in proper operating condition.

Protect the Product When Moving It

Always disconnect the power source when moving the apparatus or connecting or disconnecting

cables.

Telephone Equipment Notice

When using your telephone equipment, basic safety precautions should always be followed to reduce

the risk of fire, electric stock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry

tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a

remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger

telecommunication line cord.

SAVE THESE INSTRUCTIONS

CE Compliance

x

OL-30773-01

CE Compliance

The equipment operates in the 2400-to-2483.5 MHz, the 5150-to-5350 MHz, and the 5470-to-

5725 MHz frequency range.

Declaration of Conformity with Regard to the EU Directive 1999/5/EC

(R&TTE Directive)

This declaration is only valid for configurations (combinations of software, firmware and

hardware) supported or provided by Cisco Systems for use within the EU. The use of

software or firmware not supported or provided by Cisco Systems may result in the

equipment no longer being compliant with the regulatory requirements.

CE Compliance

OL-30773-01

x i

Note:

The full declaration of conformity for this product can be found at

.

The following standards were applied during the assessment of the product against the

requirements of the Directive 1999/5/EC:



Radio: EN 300 328



EMC: EN 301 489-1, EN 301 489-17, and EN

301 893



Safety: EN 60950-1 and EN 62311

The CE mark and class-2 identifier are affixed to the product and its packaging. This product

conforms to the following European directives:

-1999/5/EC

National Restrictions

This product is for indoor use only.

France

For 2.4 GHz, the output power is restricted to 10 mW EIRP when the product is used

outdoors in the band 2454 - 2483.5 MHz. There are no restrictions when used in other parts of

the 2.4 GHz band. Check http://www.arcep.fr/ for more details.

Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements

utilisés en extérieur dans la bande 2454 - 2483,5 MHz. Il n'y a pas de restrictions pour des

utilisations dans d'autres parties de la bande 2,4 GHz. Consultez http://www.arcep.fr/ pour

de plus amples détails.

Italy

This product meets the National Radio Interface and the requirements specified in the

National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating

within the boundaries of the owner's property, its use requires a “general authorization.”

Please check http://www.comunicazioni.it/it/ for more details.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano

Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del

proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.

Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.

Latvia

The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic

Communications Office. Please check http://www.esd.lv for more details.

2,4 GHz frekvenču joslas izmantošanai ārpus telpām nepieciešama atļauja no Elektronisko

sakaru direkcijas. Vairāk informācijas: http://www.esd.lv.

Note:

The regulatory limits for maximum output power are specified in EIRP. The EIRP level

of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the

output power available at the connector (specified in dBm).

20110311_CE_Gateway