Page 76 / 272
Scroll up to view Page 71 - 75
Chapter 3
Configuration and Operation
54
4036168 Rev B
3
Click the
Settings
tab. The Settings screen opens.
4
Click
Service Control List
. The Service Control screen opens.
5
To enable or disable a service, do the following:
To enable a service, select the check box next to the service you want to
enable. A check box with a check indicates that the service is enabled.
To disable a service, de-select the check box next to the service you want to
disable. A check box without a check indicates that the service is disabled.
6
Click
Save/Apply
to enable or disable the selected services.
Page 77 / 272
IP Access Control
4036168 Rev B
55
IP Access Control
The IP Address Access Control mode, if enabled, permits access to local
management services from IP addresses contained in the Access Control List.
If the
Access Control mode is disabled, you cannot configure the residential gateway from
non-local IP addresses. For example, you can use this feature to prevent a remote site
from configuring the residential gateway. The services are the system applications
listed in the Service Control List.
Path
: System > Management > Settings > IP Access Control
Page 78 / 272
Chapter 3
Configuration and Operation
56
4036168 Rev B
Adding IP Address Access Control
To add IP address access control, complete the following steps.
1
Click
System
on the main screen. The System Summary screen opens by default.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
3
Click the
Settings
tab. The Settings screen opens.
4
Click
IP Access Control
. The Access Control -- IP Address screen opens.
Page 79 / 272
IP Access Control
4036168 Rev B
57
5
Click
Add
. The Access Control screen opens. In the IP Address field, enter the IP
address of the management station that you want to allow access to the local
management services.
6
In the IP Address field, enter the IP address of the management station that you
want to allow access to the local management services.
7
Click
Save/Apply
to allow access for the IP address you entered.
8
Enable the Access Control Mode as shown in the following screen.
Page 80 / 272
Chapter 3
Configuration and Operation
58
4036168 Rev B
Password Access to the Residential Gateway
Access to the residential gateway is controlled through three user accounts:
admin.
Allows unrestricted access to change and view the configuration of the
residential gateway. This login allows access to privileged information.
support. Allows an ISP technician to access your residential gateway for
maintenance and to run diagnostics
user. Allows access to view configuration settings and statistics, as well as, to
update the residential gateway's software.
The admin login provides access to all screens (including privileged information) for
the residential gateway. The support login and user login provide access to only a
subset of the screens provided to the admin login.
Path
:
System > Management > Settings > Passwords
19216811.live