Chapter 3

Configuration and Operation

34

4036168 Rev B

LAN Statistics

The Statistics -- LAN screen displays statistics for the local area network (LAN). This

screen shows the number of transmitted and received packets on the LAN interface

for Ethernet, USB, and wireless devices.

Path

:

System > Statistics > LAN

Reset Statistics

To reset the statistics, click

Reset Statistics

on the screen. This action clears the

counters and sets them to zero for the packets received and transmitted on the LAN

interface.

WAN Statistics

4036168 Rev B

35

WAN Statistics

The Statistics -- WAN screen displays statistics for the devices and interfaces on the

wide area network (WAN). This screen shows the number of transmitted and

received packets for the DSL WAN interface.

Path

:

System > Statistics > WAN

Reset Statistics

To reset the statistics, click

Reset Statistics

on the screen. This action clears the

counters and sets them to zero for the packets received and transmitted on the WAN

interface.

Chapter 3

Configuration and Operation

36

4036168 Rev B

ATM Statistics

The Statistics -- ATM screen displays statistics on the ATM interface. This screen

shows the ATM Layer-2 statistics such as the number of ATM cells transmitted and

received over the ATM interface.

Path

:

System > Statistics > ATM

Reset Statistics

To reset the statistics, click

Reset

on the screen. This action clears the counters and

sets them to zero for the packets received and transmitted on the ATM interface.

Tools - Update Software

4036168 Rev B

37

Tools - Update Software

The Tools -- Update Software screen allows you to update the software for the

residential gateway with a new version.

Path

:

System > Management > Configuration > Update Software

Chapter 3

Configuration and Operation

38

4036168 Rev B

Updating Software

To update the software for the residential gateway, complete the following steps.

1

Click

System

on the main screen.

2

Click

Management

. The Configuration screen opens with the Configuration tab

in the forefront.

3

Click

Update Software

. The Tools Update Software screen opens.

Note:

This screen also gives you the option of uploading the bonding master

image or the dual image (master and slave firmware together).

4

In the Software File Name field, click

Browse

to locate the software image file.

Then:



To restore the residential gateway to factory defaults following the update,

check the

Restore to default settings after update software image

option.



To retain the current residential configuration following the update, leave

this option unchecked.