Page 81 / 272
Scroll up to view Page 76 - 80
Password Access to the Residential Gateway
4036168 Rev B
59
Creating Passwords
To create passwords for the residential gateway, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
3
Click the
Settings
tab. The Settings screen opens.
Page 82 / 272
Chapter 3
Configuration and Operation
60
4036168 Rev B
4
Click
Passwords
. The Access Control -- Passwords screen opens.
5
In the Username field from the drop-down list, select the type of password you
are creating: admin, support, or user. The default user name is
admin
.
6
In the Old Password field, enter the old password. The maximum character
length is 16 characters, and passwords cannot contain a space. The default
password is
admin
.
7
In the New Password field, enter the new password. The maximum character
length is 16 characters, and passwords cannot contain a space.
8
In the Confirm Password field, enter the new password again to confirm your
entry.
9
Click
Save/Apply
to save the password.
Tip:
Another quick way to change passwords is to go to the System (home) page.
Scroll down to the last option and click
Password Setting
. A popup screen opens
as shown below. Use this screen to enter your new passwords.
Page 83 / 272
HTTP Server Port
4036168 Rev B
61
HTTP Server Port
The HTTP Server Port screen allows you to specify the TCP port for the HTTP server
on both the LAN and WAN interfaces.
Path
:
System > Management > Settings > HttpServer
Modifying the Http Server Ports
To modify the Http Server ports, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
Page 84 / 272
Chapter 3
Configuration and Operation
62
4036168 Rev B
3
Click the
Settings
tab. The Settings screen opens.
4
Click
HttpServer
. The Http Server Port opens.
5
In the LAN Http Server Port field, enter the port number for the HTTP server
from the LAN side.
6
In WAN Http Server Port field, enter the port number for the HTTP server from
the WAN side.
Page 85 / 272
ALG Settings
4036168 Rev B
63
ALG Settings
The ALG settings allow you to enable or disable the SIP ALG based on the
customer's requirement.
Path
:
System > Management > Settings > ALG Settings
Modifying the ALG Settings
To modify the ALG settings, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
19216811.live