Page 86 / 272
Scroll up to view Page 81 - 85
Chapter 3
Configuration and Operation
64
4036168 Rev B
3
Click the
Settings
tab. The Settings screen opens.
4
Click the last option,
ALG Settings
. The ALG Settings page opens.
5
Set or clear the
SIP Enabled
check box, depending on your customer's
requirement.
Page 87 / 272
System Log Configuration
4036168 Rev B
65
System Log Configuration
The System Log -- Configuration screen allows you to log all the selected events on
the residential gateway. For example, a failed login is an event that you can select.
Path
:
System > Management > Local Management > System Log Configuration
Logging Events
To log selected events, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
Page 88 / 272
Chapter 3
Configuration and Operation
66
4036168 Rev B
3
Click the
Local Management
tab. The Local Management screen opens.
4
Click
System Log Configuration
. The System Log Configuration screen opens.
5
Do you want to enable the logging of events?
If
yes
, in the Log field select
Enable
and go to step 6.
If
no
, in the Log field, select
Disable
and click
Save/Apply
to turn off
logging. You have completed this procedure.
Page 89 / 272
System Log Configuration
4036168 Rev B
67
6
In the Log Level field, select the level of events that you want to log from the
following options. All events above or equal to the selected level will be logged.
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debugging
7
In the Display Level field, select the level of the logged events that you want to
display from the following options. All logged events above or equal to the
selected level will be displayed.
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debugging
8
Select the mode for the logging from the following options.
If the selected mode
is "remote" or "both," events are sent to the specified IP address and UDP port of
the remote syslog server. If the selected mode is "local" or "both,"
events are
recorded in the local memory.
Local. Events are logged in memory.
You must log in to the device to display
the events.
Remote.
Events log is sent to a remote server (syslog server).
Both.
Events are logged in memory and are sent to the remote server.
9
Click
Save/Apply
to start logging events.
Page 90 / 272
Chapter 3
Configuration and Operation
68
4036168 Rev B
Disabling Logging
To disable the logging function, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
3
Click the
Local Management
tab. The Local Management screen opens.
19216811.live